iPhone 17 Pro Leak: Thicker Design Than iPhone 16 Pro

Key Takeaways

1. Apple is finalizing designs for the iPhone 17 series, but the official unveiling is still months away.
2. The iPhone 17 Pro and Pro Max have similar dimensions to the iPhone 16 Pro, with the Pro’s mid-frame being slightly taller.
3. A plain dummy model of the iPhone 17 Pro has been revealed, showcasing button placements and MagSafe charging location.
4. The new two-tone design of the rear panel has received criticism for its appearance compared to the iPhone 16 Pro Max.
5. The camera housing for the iPhone 17 series is expected to have an additional layer over the camera bump, including the flash.


Apple is not likely to unveil its iPhones for 2025 for several months still. However, the designs are reportedly being finalized for case makers, as shared by Unbox Therapy.

New Models Revealed

The well-known YouTube channel claims to have gotten the higher-end iPhone 17 Pro and Pro Max models. The design for the iPhone 17 Pro is shown as a plain dummy, giving details of its shape, button placements, and the location of the MagSafe charging coil. Interestingly, it seems this model also has the dimensions of the iPhone 16 Pro’s successor.

Similar Dimensions

These dummies seem to indicate that the 17 Pro is going to be almost the same height and width as its predecessor. However, it appears to have a mid-frame that is around 0.45 millimeters taller than the 16 Pro’s frame.

The same information is believed to apply to the 17 Pro Max, although its model wasn’t measured in this particular leak, which is a bit disappointing.

Design Critique

The new two-tone design of the rear panel was featured in the video, and Unbox Therapy’s Lewis Hilsentegger criticized its looks in comparison to the 16 Pro Max.

Moreover, the camera housing for the 17 Pro series is expected to have an additional layer over its camera bump, which includes the flash. This detail was also highlighted in the video.

Source:
Link

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *