Category: Gaming

  • RTX 5070 Ti Prices Rise as Nvidia Cuts RTX 50 GPU Production

    RTX 5070 Ti Prices Rise as Nvidia Cuts RTX 50 GPU Production

    Key Takeaways

    1. Nvidia reportedly halted production of the RTX 5070 Ti, but later retracted this claim, while prices for the cards are increasing.
    2. Price for the RTX 5070 Ti in Australia may rise to AUD 1,800 after current stock sells out.
    3. Nvidia is reducing production of the entire RTX 50 series, with the RTX 60 series potentially not launching until late 2027.
    4. AMD’s Radeon RX 9000 series GPUs are also experiencing significant price increases compared to their launch prices.
    5. The current GPU market is challenging for consumers, with rising prices and limited availability expected to continue.


    Just a month ago, Hardware Unboxed found itself in the middle of a debate after it reported that Nvidia had stopped producing the RTX 5070 Ti. The information came from Asus, but Asus later changed its story. Nvidia also stated that it has not canceled any of its GeForce RTX 50 GPUs. However, the prices for both the RTX 5070 Ti and the RTX 5060 Ti 16 GB have risen significantly, hinting that Nvidia may have indeed cut back on the availability of these cards.

    Price Increases Ahead

    According to new claims from HU, the RTX 5070 Ti is likely to see additional price increases in Australia. The report indicates that once the current stock of RTX 5070 Ti, which is priced between AUD 1,550 and AUD 1,600, runs out, the price could soar to AUD 1,800 with the next restock.

    Production Cuts and Delays

    Things are looking even bleaker, as Nvidia is said to be reducing the production of the whole RTX 50 series. Furthermore, the upcoming RTX 60 series cards may not launch until late 2027. This means gamers are stuck without access to reasonably priced RTX 50 cards, and there’s no new generation to relieve the situation.

    AMD Prices Rising Too

    The GeForce RTX 50 series isn’t the only one seeing price increases; AMD’s Radeon RX 9070 and RX 9070 XT prices are also on the rise. During the Holiday 2025 season, you could obtain the RX 9060 XT 8/16 GB and RX 9070/XT at or below their suggested retail prices. Now, though, it’s hard, if not impossible, to find the RX 9000 series GPUs at those earlier prices.

    If we check Newegg, for example, the lowest-priced RX 9060 XT 8 GB is going for $349.99, which is $50 more than its $299 MSRP. The RX 9060 XT 16 GB has faced a similar situation, priced at $439.99, about $90 above its launch price of $349.

    Current Market Conditions

    The same applies to the RX 9070 and RX 9070 XT. As of now, the cheapest RX 9070 listed on Newegg is the PowerColor Reaper RX 9070, priced at $589.99. For the RX 9070 XT, the lowest option is the ASRock Challenger RX 9070 XT, retailing at $729.99, which is a $130 increase over the $599 MSRP.

    In summary, the GPU market is getting increasingly challenging for everyday consumers. If you were hoping for improvements, it looks like you’re in for a long wait.

    Source:
    Link


     

  • Nvidia Launches Beta of Native GeForce NOW App for Linux

    Nvidia Launches Beta of Native GeForce NOW App for Linux

    Key Takeaways

    1. Nvidia has launched a native GeForce NOW app for Linux, currently in beta for Ubuntu 24.04 and newer.
    2. The app allows streaming up to 5K resolution at 120 FPS or 1080p at 360 FPS, utilizing GeForce RTX 5080 performance from the cloud.
    3. The installation requires a .bin installer and is provided as a Flatpak, with a potential runtime download of around 2 GB.
    4. Recommended bandwidth is at least 65 Mbps for optimal streaming quality, with a target latency of below 80 ms.
    5. Current limitations include the absence of HDR, AV1 support, Cloud G-Sync, and VRR on Linux.


    Nvidia has introduced a native GeForce NOW application for Linux computers, currently in beta, starting with Ubuntu 24.04 and newer versions. The company mentions that this desktop-oriented app aims to provide a user experience similar to its Windows and macOS applications, unlike the prior Linux version, which was tailored for Steam Deck users.

    Streaming Capabilities

    For setups that meet the requirements, Nvidia is advertising streaming possibilities of up to 5K resolution at 120 frames per second or 1080p at a maximum of 360 frames per second, which varies based on your specific configuration. Additionally, Nvidia emphasizes that the experience utilizes “GeForce RTX 5080 performance from the cloud,” featuring RTX capabilities such as ray tracing and DLSS, depending on what the game or service supports.

    Installation and Requirements

    The Linux beta can be obtained from Nvidia’s download page as a .bin installer (you need to run chmod +x before executing the installer), and according to Nvidia’s support documentation, the app is provided as a Flatpak, which may come with a runtime download of around 2 GB in many scenarios.

    Performance Guidelines

    Nvidia’s Linux setup guide offers bandwidth recommendations, indicating that you’ll need at least 65 Mbps for streaming at 5K and 120 FPS. The company also highlights that they aim for latency to be below 80 ms to reach an Nvidia data center, with a preference for it to be under 40 ms. Currently, Nvidia lists some feature limitations on Linux, such as the absence of HDR, no AV1 support, and no Cloud G-Sync or VRR, among other missing features.

  • Xbox Elite Series 3 Controller: Expected 2026 Release with Cloud Gaming

    Xbox Elite Series 3 Controller: Expected 2026 Release with Cloud Gaming

    Key Takeaways

    1. Microsoft is set to enhance its Xbox controller lineup, with the Elite Series 3 expected to launch in 2026, featuring cloud gaming capabilities.
    2. The Elite Series 3 may include WiFi support for reduced latency during gameplay, allowing direct connection with cloud gaming servers.
    3. Enhanced haptic feedback features are anticipated, aiming to compete with the PlayStation DualSense for more accurate in-game reactions.
    4. There are discussions about including rechargeable batteries in new models, though concerns about playtime compared to Sony’s offerings remain.
    5. Durability issues with current Xbox controllers are being addressed with potential new technology, although the integration of these controllers into future Xbox consoles is still uncertain.


    With the decline of the Xbox Series X|S, it’s easy to overlook that Microsoft continues to offer sought-after hardware. According to a new article from The Verge behind a paywall, the company seems poised to enhance its lineup of Xbox controllers. Among the upcoming options, the Elite Series 3 is anticipated to launch in 2026, featuring cloud gaming capabilities.

    New Features on the Horizon

    Tom Warren mentions a product that resembles the Sebile, an Xbox controller that was supposed to come out in 2024. Unfortunately, an updated Series X console never materialized, which likely pushed back its release. A notable new feature would be WiFi support, allowing the controller to connect with cloud gaming servers. This advancement aims to provide gamers with reduced latency during gameplay.

    Connectivity and Release Speculations

    The Elite Series 3 controller may stand alone, yet it will utilize this innovative type of connectivity. Warren also refers to Windows Central’s Jez Corden, who has hinted at a 2026 arrival for this accessory. Although the Senior Editor cannot guarantee when the Series 3 will be available, it will probably be part of a broader array of new gaming hardware.

    Haptic Feedback and Battery Concerns

    Many gamers might be eager for Microsoft’s professional-grade equipment to incorporate features leaked from the Sebile. Discovered in court documents related to the Activision Blizzard acquisition, some of these features include enhanced haptic feedback. Competing with the PlayStation DualSense, this would offer players more accurate reactions to events happening in games.

    On a more contentious note, the company might choose to include rechargeable batteries even in a less expensive model. The Elite Series 2 already comes with an internal battery pack. While this could help consumers save some cash, it’s uncertain if the playtime would surpass that of its competitor from Sony.

    Durability and Future Plans

    Leaks have yet to clarify whether players should expect Hall effect or TMR analog sticks in any new Xbox controllers. Critics argue that the current stock and Elite models face durability problems, which the new technology aims to resolve.

    How these upcoming controllers will integrate into Microsoft’s strategy for the next Xbox console remains uncertain. Recently, AMD suggested that a system akin to a Windows gaming PC might emerge in 2027. Many prebuilt systems lack a controller, but even Valve is including a new accessory with its Steam Machine.

    Source:
    Link


     

  • Final Fantasy 7 Rebirth: 102GB Storage Needed on Switch 2

    Final Fantasy 7 Rebirth: 102GB Storage Needed on Switch 2

    Key Takeaways

    1. Release Date and Pricing: Final Fantasy 7 Rebirth will be released on June 3rd for the Switch 2, priced at $49.99.

    2. Storage Requirements: The game requires 102GB of installation space, which is a significant portion of the Switch 2’s 256GB storage.

    3. Game-Key Card Limitations: The game exceeds the capacity of a 64GB cartridge, meaning players will need to download additional data.

    4. Comparison with Other Consoles: The file size for the Switch 2 version is smaller than the PS5 (145GB), showing reasonable optimization for the platform.

    5. Future Storage Solutions: Players may need external MicroSD Express cards due to limited internal storage, with prices expected to remain high.


    The recent Nintendo Direct Partner Showcase has announced the release date for Final Fantasy 7 Rebirth, which is set for June 3rd. Gamers also found out the pricing and file size for this title on the Switch 2, which will be available on a Game-Key Card. Many players think the price of $49.99 is fair, but the 102GB installation size might lead to storage issues for some.

    Storage Concerns

    When Final Fantasy 7 Remake Intergrade was launched in January, it required at least 90GB on the handheld. Since players don’t have endless time to finish the first part, the arrival of the sequel is quite soon. As the largest game on the Switch 2, Rebirth will take up 75% of the console’s 256GB storage.

    Game-Key Card Limitations

    Both Square Enix titles are too large for a 64GB cartridge. A Game-Key Card enables players to access games on various Nintendo handhelds, but it primarily depends on downloading data. Director Naoki Hamaguchi mentioned that the standard media may have restricted performance.

    Comparison with Other Platforms

    Even with the big file size of the Final Fantasy 7 Rebirth port for the Switch 2, it is still reasonable when compared to other consoles. The PS5 version is about 145GB, and PCs have similar requirements. Hamaguchi even expressed his appreciation for the developers’ efforts on social media. They previously managed to create a more compact installation for the Steam Deck.

    Optimization Challenges

    The second part of the trilogy was especially challenging to optimize for the development team. The expansive open-world designs resulted in larger assets, putting pressure on CPUs and GPUs. A new trailer has been released, but players will need to wait until the Rebirth launch date to discover if any details were sacrificed.

    Future Storage Solutions

    Using external MicroSD Express cards is one way to fit all three FF7 remakes on the device. However, with AI data centers consuming NAND flash, prices for these cards aren’t expected to drop anytime soon. This shortage also diminishes the likelihood of Nintendo producing a Switch 2 Pro with a larger storage option.

    Upcoming Titles

    Additionally, there are rumors that Final Fantasy 7 Remake Part 3 might be released as early as Summer 2026. It seems highly probable that the entire trilogy won’t fit on the handheld’s memory without needing to buy extra accessories.

    Source:
    Link


     

  • Nvidia GeForce RTX 50 Super Refresh and RTX 60 Series Delayed

    Nvidia GeForce RTX 50 Super Refresh and RTX 60 Series Delayed

    Key Takeaways

    1. The RTX 50 Super series has been delayed, with speculation of possible cancellation by Nvidia.
    2. The RTX 60 series, originally set for late 2027, is now expected to launch in 2028 or later due to resource allocation for AI hardware.
    3. Nvidia may reduce production of current RTX 50 models, particularly affecting the 16 GB RTX 5060 Ti and RTX 5070 Ti.
    4. The only Nvidia GPU with 16 GB of VRAM could be the GeForce RTX 5080, likely at a high price.
    5. AMD is expected to offer reasonably priced 16 GB gaming GPUs, like the Radeon RX 9070 XT and RX 9060 XT, while Intel’s Arc B770 is only a rumor.


    A lot of talks from last year (2025) hinted that Nvidia was set to unveil its RTX 50 Super series at CES 2026. Sadly, Nvidia didn’t share much for consumers and instead concentrated on AI developments. According to a new report from The Information (via Reddit), those who are planning to purchase a new Nvidia GPU in 2026 might be let down.

    Delays in the RTX 50 Super Lineup

    It seems that the entire RTX 50 Super series has been delayed to an unknown date. At this stage, it’s fair to think Nvidia might have canceled it. The main goal of this refresh was to boost the VRAM on the current Blackwell graphics cards. Given the shortage of memory, Nvidia may struggle to keep prices reasonable.

    Impact on the Next-Gen RTX 60 Series

    Consequently, the upcoming RTX 60 series gaming GPUs, based on the Rubin architecture, have also been affected. Originally scheduled for a late 2027 release, they are now expected to debut in 2028 or even later. Right now, Nvidia is concentrating all its resources on addressing its large backlog of AI hardware.

    Changes in Production Plans

    The report goes on to say that Nvidia might reduce the production of current RTX 50 models. This supports earlier speculations that suggested the same, with the 16 GB RTX 5060 Ti and RTX 5070 Ti being the first to feel the impact. Essentially, the only Nvidia GPU with 16 GB will be the GeForce RTX 5080—and it will probably come with a steep price tag.

    In the end, the only reasonably priced gaming GPUs with 16 GB of VRAM are likely to come from AMD, including the Radeon RX 9070 XT and Radeon RX 9060 XT. There’s also Intel’s rumored Arc B770, which has the same memory capacity, but as of now, it only exists in rumors.

    Source:
    Link


     

  • AutoFull M6 Ultra 2.0 Gaming Chair: Lumbar Support & Temp Control

    AutoFull M6 Ultra 2.0 Gaming Chair: Lumbar Support & Temp Control

    Key Takeaways

    1. The M6 Ultra 2.0 gaming chair features a massaging seat cushion and advanced lumbar support, enhancing comfort and support compared to its predecessor.
    2. It is marketed as the world’s first ventilated massage gaming chair, equipped with a climate control system and dual cooling fans that can reduce surface temperature by up to 19 °C.
    3. The third-generation adaptive lumbar support system offers dynamic tracking and significant adjustment options for spinal alignment, including 60 mm of travel and 5° rotation adjustment.
    4. The chair includes fully adjustable 360° armrests and a robust design with a strong aluminum alloy base, high-density foam padding, and a recline support range from 90° to 160°.
    5. The retail price for the AutoFull M6 Ultra 2.0 gaming chair is $599.99/£599.99, available for purchase on AutoFull’s official website.


    AutoFull has introduced the upgraded M6 Ultra 2.0 gaming chair to the global market. This new model is a direct successor to the original M6 Ultra and comes with significant enhancements. Specifically, the M6 Ultra 2.0 features a massaging seat cushion and third-generation dynamic tracking lumbar support, both of which were not available in the previous version.

    Design Features

    The design of the M6 Ultra 2.0 remains largely unchanged from its predecessor. The company has promoted it as the first-ever ventilated massage gaming chair in the world. The chair is equipped with a climate control system that is built directly into the seat cushion. Additionally, it includes dual cooling fans, which, according to AutoFull, can lower surface temperature by up to 19 °C with three levels of manual adjustment.

    Advanced Support System

    This iteration introduces the third-generation M-series adaptive lumbar support system, designed to provide dynamic tracking that adapts to the user in order to keep the spine aligned. The system allows for adjustments, offering 60 mm of travel both front and back, 50 mm of automatic adaptation, and a rotation adjustment of 5°.

    Moreover, it comes with a 3D ErgoCloud headrest made from memory foam, which allows for multi-directional adjustments such as height, angle, and forward or backward positioning to alleviate cervical pressure. The weight capacity has also increased; the M6 Ultra 2.0 can now support up to 180 kg (396.8 lbs), compared to the 150 kg (330.6 lbs) limit of the older model.

    Enhanced Armrests and Other Features

    Another significant upgrade is in the armrests. The new chair features fully adjustable 360° armrests that can be modified in height, depth, and angle. Additional features include a strong aluminum alloy base with robust casters, an SGS Class-4 gas lift, breathable PU leather with high-density foam padding, a built-in lumbar vibration massage, and a recline support that ranges from 90° to 160°, complete with a 20° rocking mode.

    In terms of pricing, the AutoFull M6 Ultra 2.0 gaming chair retails for $599.99/£599.99. Those interested can purchase it on AutoFull’s official website.

    Source:
    Link


     

  • Epic Games Store Offers 2 Award-Winning Free PC Games in Feb 2026

    Epic Games Store Offers 2 Award-Winning Free PC Games in Feb 2026

    Key Takeaways

    1. Epic Games Store is offering free games worth $49.98 in February 2026, with new titles added after the current giveaway period.
    2. The Darkside Detective: A Fumble in the Dark will be available for free from February 12 to February 19, 2026; it features a pixel-art style and engaging puzzles with dry humor.
    3. While The Darkside Detective is praised for its friendly puzzles, some item combinations may be odd, and certain cases can feel lengthy.
    4. Nobody Wants to Die, another free game available during the same period, focuses on narrative choices and time manipulation in a dystopian setting.
    5. Both games are award-winning, with Nobody Wants to Die typically priced at $24.99 and receiving a “Very Positive” rating on Steam.


    Epic Games Store has kicked off February 2026 with its first batch of free games, totaling a value of $49.98. Once this current giveaway period is over, new titles will be added to the free game lineup. The platform has also announced that two award-winning games will be available for free in mid-February.

    Upcoming Free Game: The Darkside Detective

    One of the free games coming to PC is The Darkside Detective: A Fumble in the Dark. According to its Steam listing, this pixel-art mystery adventure received numerous accolades at the Aggie Awards 2021 and IMIRT 2021. Players have given it high praise as well, with a current rating of “Overwhelmingly Positive” from over 1,500 reviews.

    This game maintains the classic point-and-click format while showcasing beautifully crafted pixel-art environments. Players can engage with various objects, collect and mix items, and tackle logic puzzles as they navigate through the storyline.

    Puzzles and Humor

    When it comes to puzzles, this upcoming title from Epic Games Store offers a friendly experience rather than a frustrating one. The indie game is also notable for its tone, featuring dialogue that is rich with dry humor and witty exchanges.

    However, not everything is perfect. Some puzzles may require strange item combinations, and a few reviewers have pointed out that certain cases can drag on a bit too long.

    Despite these flaws, it’s a solid choice for fans of titles like the Frog Detective series, Puzzle Agent (which can be found on Humble Bundle), and Gibbous: A Cthulhu Adventure. Normally priced at $14.99, The Darkside Detective: A Fumble in the Dark will be free on Epic Games Store from February 12 to February 19, 2026.

    Second Free Game: Nobody Wants to Die

    The second free title is Nobody Wants to Die, another award-winning game set in a dystopian version of New York, primarily focusing on the noir detective adventure theme.

    In terms of gameplay, it emphasizes narrative choices and investigation over traditional puzzles. Players utilize time-manipulation technology to reconstruct crime scenes, making it vital to capture key moments. The outcomes of cases hinge on dialogue and investigative decisions, allowing for multiple endings.

    On Steam, it boasts a “Very Positive” rating from over 2,500 reviews. However, some players feel that the time-rewind feature makes the game easier than intended. Additionally, certain case endings may seem abrupt, but it remains a respectable detective game. Typically, it retails for $24.99, but it will be free on Epic Games Store from February 12 to February 19.

    Source:
    Link


     

  • Starfield and Borderlands 4 Rumored Cancelled for Switch 2

    Starfield and Borderlands 4 Rumored Cancelled for Switch 2

    Key Takeaways

    1. Bethesda announced that Fallout 4 and Oblivion Remastered will be available on the Nintendo platform, but Starfield’s release remains uncertain.
    2. Insider Shinobi602 suggests that a Switch 2 version of Starfield might be canceled, with a PS5 version expected in April 2026.
    3. Take-Two Interactive has delayed Borderlands 4 for the Nintendo console, indicating potential development challenges similar to those Bethesda might face.
    4. Starfield’s technical demands could exceed the capabilities of the Switch 2, leading to performance issues.
    5. Despite a showcase of third-party games for the Switch 2, Bethesda may not prioritize resources for Starfield’s development on the handheld console.


    Bethesda made a big announcement during the latest Nintendo Direct Partner Showcase, revealing that Fallout 4 and Oblivion Remastered will be coming to the platform. However, a highly anticipated game for the rumored Switch 2, Starfield, has not been mentioned yet. Insider Shinobi602 has suggested that it might never be released for the handheld console.

    Insights from Shinobi602

    Shinobi602 is known for making accurate predictions, mostly related to PlayStation. On the ResetEra forums, he addressed rumors about a Starfield version for the PS5 that is expected to be released in April 2026. While this means more gamers might soon enjoy the title, it’s looking like Nintendo fans may miss out. The insider indicated that the Switch 2 version has been “pushed out” and could be canceled altogether.

    Delays and Development Challenges

    In recent news, Take-Two Interactive announced that Borderlands 4 for the Nintendo console has been delayed indefinitely. Developers are having a tough time optimizing the game, and it looks like Bethesda might be facing similar challenges. Shinobi602 emphasized that the issues are not due to a lack of development kits or any strategic choices, saying, “They’re having problems with it, nothing to do with holidays or anything.”

    Unlike Borderlands 4, there has been no official confirmation for a Starfield release on Switch 2. Despite that, reliable sources like NateTheHate2 have predicted a port could arrive in 2026. Yet, when it comes to performance issues, there’s a significant difference compared to Gearbox’s looter shooter.

    Performance and Technical Specifications

    Bethesda’s space RPG was launched on PC and Xbox consoles in 2023. Although it remains demanding, the studio has had years to enhance frame rates. However, the specs of the Switch 2 may not be powerful enough to run the expansive open-world galaxy without issues.

    Starfield is quite CPU-intensive, which could create problems for the handheld console. Its Nvidia Tegra T239 SoC is indeed faster than the original Switch chip, but it still requires compromises. Developers often have to use DLSS upscaling to deliver a satisfactory experience. Additionally, the frequent loading screens present a challenge since slower cartridges may not match the speed of internal storage.

    A Look at the Future

    The recent Nintendo Direct showcased a plethora of third-party games for the Switch 2. Many of these titles were previously exclusive to PS5, Xbox Series X|S, and PC. However, it seems that Bethesda has decided that putting resources into Starfield may not be beneficial.

    Source:
    Link


     

  • Sony CFO Reveals Exciting News for Future PS5 Buyers

    Sony CFO Reveals Exciting News for Future PS5 Buyers

    Key Takeaways

    1. Strong Sales Performance: The PS5 has sold 92.2 million units since launch, indicating strong demand despite global challenges.

    2. Secured Memory Supply: Sony has secured enough memory for the current fiscal year, easing concerns about production shortages.

    3. Price Stability Expected: The prices of PS5 consoles are likely to remain stable at MSRP until 2026, following previous price increases.

    4. Future Challenges: Potential difficulties in negotiating better supply deals could impact console pricing in 2027, especially for the PS6.

    5. Market Sensitivity: The gaming market remains sensitive to economic shifts, which could affect manufacturers’ pricing strategies in the future.


    Sony has just disclosed its sales figures for PlayStation hardware and software, showing that the console is doing quite well despite global challenges. In recent months, the significant rise in memory prices and limited availability has led many manufacturers, including Sony, to raise their prices. However, there’s some positive news for potential PS5 buyers.

    Strong Sales Performance

    According to the Q3 earnings report, Sony announced that the PS5 has sold 92.2 million units since its launch. Chief Financial Officer (CFO) Lin Tao also talked about the memory shortage issue. He mentioned that the company has already secured enough memory for this fiscal year. Here’s what he said:

    “We are in a good position to secure the minimum amount of memory needed to handle the year-end selling season for the next fiscal year. We will also continue negotiating with various suppliers to ensure we have enough supply to meet customer demand.”

    Price Stability Ahead

    This news is encouraging for those who are considering getting a PS5 or PS5 Pro, as they will likely find stock and be able to buy at the manufacturer’s suggested retail price (MSRP) until 2026. It’s worth noting that Sony raised the prices of the PS5 consoles previously, in August last year, increasing the PS5, PS5 Digital Edition, and PS5 Pro by $50 over their original launch prices. With the memory supply now secured, these new prices may remain stable through 2026, at least for now.

    Challenges Still Remain

    Nonetheless, the future of console production still faces difficulties. If Sony cannot negotiate better deals with suppliers, the pricing for consoles in 2027 could be impacted. The PS6, which appears to be scheduled for release at the end of 2027 or early 2028, might launch at significantly higher prices.

    Each manufacturer is keeping a close eye on the market, and the economic landscape could shift in the future. This might lead them to either absorb the increased costs or pass them on to consumers.

    Sony’s earnings call certainly provides some insight into the current state of the gaming market.

    Source:
    Link


     

  • Anbernic RG G01 Controller Price and Release Date Announced

    Anbernic RG G01 Controller Price and Release Date Announced

    Key Takeaways

    1. Release Date and Pricing: The Anbernic RG G01 will be available from February 7 at 2 AM PST for $39.99, with a $4 discount for the first three days, lowering the price to $35.99.

    2. Color Options and Accessories: The controller comes in Black, Yellow, and White, and includes two extra high-rise thumbsticks, a 2.4G wireless receiver, a USB-C charging cable, and a complimentary smartphone holder.

    3. Smart Features: The RG G01 features a 2.5D IPS display that shows heart rate and allows users to adjust settings directly on the controller without an app.

    4. Additional Specifications: It includes micro switch ABXY buttons, adjustable triggers, a 6-axis gyroscope, a rotating D-Pad, removable faceplate, four back buttons, and a 2,100mAh battery lasting up to 21 hours.

    5. Connectivity and Compatibility: The controller connects via Bluetooth, 2.4G wireless, and USB-C, and is compatible with platforms like Windows, SteamOS, Linux, Nintendo Switch/Switch 2, Android, and iOS.


    Anbernic has started 2026 by introducing a brand new controller known as the RG G01. While there are plenty of controllers available, this wireless one from Anbernic boasts some unique features that make it quite appealing, including a display screen and a heart rate sensor. They’ve now shared the pricing and release date for the controller.

    Release Date and Pricing

    The Anbernic RG G01 will be on sale starting February 7 at 2 AM PST, with a price tag of $39.99. For the first three days, Anbernic is offering a $4 discount, reducing the price to $35.99.

    Color Options and Accessories

    This controller comes in three colors: Black, Yellow, and White. It will be shipped with two extra high-rise thumbsticks, a 2.4G wireless receiver, and a USB-C cable for charging and wired play. Plus, every order will include a complimentary smartphone holder.

    Anbernic has set a competitive price for the RG G01, and its affordability along with its features puts it ahead of competing controllers from brands like 8BitDo and GameSir.

    Smart Features

    Known as a smart game controller, the Anbernic RG G01 features a 2.5D IPS display that performs multiple functions. It not only shows a player’s heart rate during games but also allows users to adjust settings without needing an app. Settings for joystick and trigger calibration, key mapping, and input modes can all be changed directly on the controller.

    Additional Specifications

    Moreover, the RG G01 comes with micro switch ABXY buttons, adjustable triggers, a 6-axis gyroscope, and a rotating D-Pad. It includes a removable faceplate, four back buttons that can be disabled with a switch, purple Kirin capacitive joysticks that have wear-resistant rings, and a 2,100mAh battery that can provide up to 21 hours of use on a single charge.

    The Anbernic RG G01 connects through Bluetooth, 2.4G wireless, and USB-C, making it compatible with a range of platforms including Windows, SteamOS, Linux, Nintendo Switch/Switch 2, Android, and iOS.

    Source:
    Link