Key Takeaways
1. The Nintendo Switch 2 will be available to customers soon, with a teardown video already released by ProModding.
2. The console has red and blue stickers over screws that are only visible after removing the Joy-Con controllers.
3. Accessing the console is relatively easy, but removing the stickers could potentially cause damage.
4. The cooling system includes a small fan and a copper heat pipe, and the console is expected to use no more than 10 watts during heavy use.
5. Both USB-C ports are soldered to the mainboard, and it is unclear if the battery is secured with adhesive like the original Switch.
The Nintendo Switch 2 is set to reach customers within the next 24 hours, but the YouTube channel ProModding has already taken the console apart and shared a teardown video, which you can see below. Nintendo has placed red and blue stickers over the screws on the back panel, which become visible once you detach the magnetic Joy-Con 2 controllers.
Opening the Console
These stickers are tricky to peel off without causing damage, but apart from that, getting into the console is pretty straightforward. The kickstand is built into the back panel and is easy to swap out, assuming Nintendo plans to offer official replacement parts. This might be needed since, according to ProModding, the kickstand doesn’t seem very durable. Once you’re inside, there are many screws and cables to disconnect to take off the metal cover that helps with heat dissipation from the processor, as shown by the thermal paste applied to it.
Cooling System Details
Beneath that cover, the cooling system features a small fan and a copper heat pipe. The Switch 2 is not likely to use more than 10 watts while in use, so the cooling setup should be adequate. However, both USB-C ports are soldered onto the mainboard, which means they can’t be replaced like on many smartphones. Sadly, the teardown video does not show the removal of the battery, leaving it unclear whether it is attached with a bothersome adhesive like the original Nintendo Switch (starting at $299 on Amazon).
Conclusion
ProModding (YouTube) has provided some interesting insights into the Nintendo Switch 2’s design and components, showing how the console is put together and what to expect.
Source:
Link
Leave a Reply