Key Takeaways
1. Linzin modified the iPhone Air to have a transparent back and a functional physical SIM slot, building on previous work by Phone Repair Guru.
2. The modification process involved complex tasks, including using a laser to peel off paint without damaging the MagSafe charging coil.
3. A significant alteration included cutting a hole for the SIM slot, which required replacing the original haptic engine with a smaller version.
4. The modifications led to issues such as reduced thermal performance, loss of dust and water resistance, and a loose microphone cable.
5. Linzin’s project resulted in a unique iPhone Air design, but with trade-offs like poor thermal management, decreased durability, and voided warranty.
We have seen a thrilling modification of the Apple iPhone Air that was transparent, made possible by the popular YouTube channel Phone Repair Guru. However, a new YouTuber, Linzin, has taken this concept to a whole new level. He not only added a transparent back to his iPhone Air with the assistance of modding experts in the Huaqiangbei market in China but also included a fully functional physical SIM slot.
Challenging Modifications
The task was not simple, as one might guess. The hardest part wasn’t merely peeling off the paint layers from the iPhone Air’s rear glass; the real struggle was using a laser for this task while making sure not to harm the MagSafe charging coil. After all, the MagSafe battery pack is crucial for many users. Once the glass was cleared, the back of the iPhone Air turned transparent, revealing its stunning internal components.
Further Improvements
Linzin’s ambitions didn’t stop there; the skilled modders were then given the job of cutting a sizable hole in the iPhone Air’s body to accommodate the physical SIM slot. This alteration meant that the original haptic engine from Apple had to be removed, replaced by a smaller third-party version. After some intricate soldering on the board, the SIM slot was operational, and the device powered up without issues.
Resulting Issues
Nonetheless, some problems arose as expected. The thermal performance of the iPhone Air took a hit due to the removal of the heat pads from the back panel during the paint stripping. Additionally, the device lost its dust and water resistance. To make matters worse, a microphone ribbon cable became loose later, necessitating a return for repairs.
In conclusion, it seems Linzin achieved his goal—transforming an Apple iPhone Air into a model with a transparent back and a SIM slot that makes switching eSIMs easier. The trade-offs? Poor thermal management, reduced durability, and a warranty that is voided.
Source:
Link
Leave a Reply