Tag: CMF Phone 2 Pro

  • Affordable Nothing CMF Phone Hit by DRAM Crisis

    Affordable Nothing CMF Phone Hit by DRAM Crisis

    Key Takeaway

    – CMF Phone 2 Pro removed from Nothing’s official website due to rising DRAM/NAND costs.
    – No new CMF Phone will launch in 2026; high memory prices prevent delivering better specs at a budget price.
    – Nothing will focus on other CMF product categories less affected by the DRAM crisis.
    – Nothing Phones are unaffected, as their higher price points allow for offsetting memory cost increases.
    – The DRAM crisis is expected to last several years; last year’s models are a better buy for affordable mid-range phones.


    The dram crisis is not only making mid-range and flagship smartphones more expensive. The rapidly rising costs of RAM and flash storage are even more noticeable in cheaper models. Nothing is now responding by removing the affordable CMF Phone 2 Pro from its lineup. The device can still be found at some retailers, but it is no longer listed on Nothing’s official website.

    Confirmation from Nothing’s Co-Founder

    Nothing co-founder Akis Evangelidis also confirmed in the X post embedded below that no new CMF Phone will launch in 2026. Nothing had been working on a successor to the CMF Phone 2 Pro, but given the very high prices for DRAM and NAND, the company simply would not be able to bring a smartphone to market that offers better specs than the CMF Phone 2 Pro while still being priced appropriately for Nothings budget CMF sub-brand.

    Strategic Shift to Other Products

    Instead, Nothing plans to focus on other product categories and launch several new CMF products that are not as heavily affected by the dram crisis. This change in plans only affects CMF Phones, not Nothing Phones, which are usually positioned at somewhat higher prices and therefore have more room to offset higher memory costs either through hardware compromises or a price increase. The DRAM crisis is expected to last for several more years, so anyone looking for an affordable mid-range smartphone in the coming months may be better off considering last years models rather than waiting for new ones.

    Akis Evangelidis (X)

    Sources
  • Nothing Phone 3a Lite vs CMF Phone 2 Pro: Best Budget Choice

    Nothing Phone 3a Lite vs CMF Phone 2 Pro: Best Budget Choice

    Key Takeaways

    1. The Nothing Phone (3a) Lite and CMF Phone 2 Pro are similar in appearance and price, leading to a direct comparison.
    2. Both devices share core features, making performance and display quality comparable.
    3. The Nothing Phone (3a) Lite has a curved glass back, giving it a more luxurious feel.
    4. The design of the Nothing Phone (3a) Lite reflects the brand’s distinct aesthetic and high-end appeal.
    5. Individual preferences will play a key role in choosing between the two devices based on their subtle differences.


    A new mid-range smartphone from Nothing has recently been released: the Phone (3a) Lite. This device bears a striking resemblance to the CMF Phone 2 Pro, another mid-range offering from Nothing’s sub-brand. This similarity may leave you wondering which device is the superior choice, especially since they are priced similarly. To help you make a more informed decision, we’ll highlight the key—but important—differences between the Nothing Phone (3a) Lite and the CMF Phone 2 Pro.

    Shared Features

    Before diving into the differences, it’s important to mention the core features that both phones have in common.

    If your choice depended only on performance or the quality of the display, you might as well flip a coin. However, these subtle differences are where your individual preferences will come into play.

    Material and Feel

    The first significant difference is in the materials and overall feel of the devices.

    The Nothing Phone (3a) Lite embraces the brand’s distinct aesthetic. It features a curved glass back, which provides a more luxurious texture that reminds users of its flagship models. If you appreciate that unique transparent design and want a device that feels high-end, then this phone is the one for you.

    Source:
    Link


     

  • CMF Phone 2 Pro: Seize Every Opportunity with Confidence

    CMF Phone 2 Pro: Seize Every Opportunity with Confidence

    Key Takeaways

    1. Worldwide NFC support and exclusive eSIM functionality in Japan.
    2. Triple camera system with optical zoom, but no optical image stabilization.
    3. Powered by MediaTek Dimensity 7300 chip with satisfactory performance and impressive two-day battery life.
    4. Contemporary design with visible screws, but lacks modularity and easy back removal compared to CMF Phone 1.
    5. Runs on Android 15 with NothingOS 3.2, promising six years of updates.


    The CMF Phone 2 Pro serves as the global follow-up to the previous CMF Phone 1, which was initially designed for the Indian market. This new model offers worldwide NFC support, although eSIM functionality is exclusive to Japan. Noteworthy aspects include the ability to expand storage using a microSD card and a vibrant OLED screen that provides excellent color accuracy, even if the PWM frequency isn’t ideal at lower brightness levels.

    Camera and Performance

    Equipped with a triple camera, this phone offers optical zoom, but it lacks optical image stabilization. The front-facing camera performs well, though it has limitations when it comes to video recording. The device runs on the MediaTek Dimensity 7300 chip, which offers satisfactory performance, although it may struggle with demanding applications. Battery performance is impressive, easily lasting two days. Additional advantages include effective biometric security, a dependable haptic feedback motor, and support for a broad array of Bluetooth codecs. Its software is based on Android 15 with NothingOS 3.2, promising six years of updates.

    Design and Sustainability

    The CMF Phone 2 Pro features a contemporary plastic body with visible screws, though it is not as modular as its predecessor. While the screws are removable, the back is not designed for easy removal or replacement, which is seen as a downgrade from the CMF Phone 1. A removable battery or swappable camera modules would have been a more user-friendly design choice. In terms of sustainability, it would have been nice to see Nothing take more proactive steps.

    In conclusion, the CMF Phone 2 Pro stands out as a reliable mid-range smartphone that offers a well-rounded set of features, despite some compromises in certain areas.

    Source:
    Link

  • Nothing Phone (3) Teaser Reveals New Design in Classic Colors

    Nothing Phone (3) Teaser Reveals New Design in Classic Colors

    Key Takeaways

    1. The Phone (3) will be the first Android smartphone from Nothing without an LED Glyph interface.
    2. The design will feature “Ultra-precise engineering” with unique cut-outs, resembling the Accessory Point from the CMF Phone 2 Pro.
    3. Rear design features are typically non-functional and covered by a transparent layer.
    4. The Phone (3) will have a similar White color to the mid-range Phone (3a), priced at $430.
    5. The launch is set for July 1, 2025, alongside Nothing’s first-generation Headphones (1), and will not include the Snapdragon 8 Elite processor.


    The Phone (3) is expected to be the first Android smartphone from Nothing that won’t feature an LED Glyph interface. However, it appears that the phone will keep the unique design elements of the series, as suggested by its recent teaser.

    Innovative Design Approach

    According to a new update from the London-based company on X, this model involves a method of “Ultra-precise engineering.” This technique seems to create several mysterious cut-outs, one of which resembles the Accessory Point seen on the CMF Phone 2 Pro.

    Functional Design Choices

    Nevertheless, it’s worth noting that the design features on the rear of the main Nothing Phone line are usually not functional and are covered by a transparent layer anyway.

    The Phone (3) reportedly showcases the same White color as its mid-range sibling, the Phone (3a), which is currently priced at $430 on Amazon, as seen in a new close-up image.

    Upcoming Launch Details

    The new flagship device is anticipated to be revealed along with Nothing’s first-generation Headphones (1) and is expected to not include the Snapdragon 8 Elite processor, with a launch date set for July 1, 2025.

    Source:
    Link

  • Samsung’s Future: Modular Phones with Replaceable Lenses

    Samsung’s Future: Modular Phones with Replaceable Lenses

    Key Takeaways

    1. Samsung has filed a patent for a modular smartphone design that supports interchangeable lens accessories.
    2. The patent outlines four main components: device housing, lens assembly, image sensor, and motor/actuator.
    3. The phone can recognize attached lenses using methods like magnets or RFID tags, allowing automatic camera setting adjustments.
    4. Additional accessories like flash units and batteries could also be accommodated in the phone’s design.
    5. While the patent reveals interesting concepts, it’s uncertain if these features will be available to consumers in the future.


    With the recent launch of the CMF Phone 2 Pro, featuring external lens accessories, it appears that Samsung also has a similar idea in development. A newly discovered Samsung patent reveals a modular phone design that supports replaceable accessories, especially lenses. The patent outlines four key components that would, in theory, let users attach various lenses to their phone’s internal camera system.

    Patent Insights

    According to a report by 91mobiles, this patent was submitted to WIPO by Samsung Electronics last year and became public on April 24 this year. The drawings illustrate a standard Samsung flagship smartphone that includes a square external housing positioned above the camera lenses. The patent identifies four main components: a device housing, lens assembly, image sensor, and a motor or actuator.

    Functionality of Components

    The device housing is the square part that holds all the other components together. The lens assembly includes the interchangeable lenses that connect to the housing, while the image sensor gathers data from these lenses. The motor or actuator is likely responsible for enabling zoom and focus features by adjusting either the lens assembly or the sensor.

    The report states that the device must recognize which lens is connected, potentially using magnets, RFID tags, or resistors for this purpose. This capability would enable the device to automatically change various settings in the camera application. It also mentions that this housing could accommodate additional accessories like flash units, batteries, and extra displays.

    Market Viability

    It’s important to understand that these are just concepts at this stage, and it’s uncertain if they will ever reach consumers. However, given the CMF Phone 2 Pro with its interchangeable lenses, it wouldn’t be surprising if other companies begin to explore similar modular designs. The Phone 2 Pro features a detachable back panel that allows users to easily swap in different lenses.

    Source:
    Link


  • CMF Phone 2 Pro Launches Affordable Smartphone with Modular Camera

    CMF Phone 2 Pro Launches Affordable Smartphone with Modular Camera

    Key Takeaways

    – The CMF Phone 2 Pro features an upgraded camera system with a 1/1.57-inch main sensor and a 50 MP telephoto lens, capturing 64% more light than its predecessor.
    – It includes an 8 MP ultrawide camera and retains the 16 MP selfie camera from the CMF Phone 1, with modular capabilities for interchangeable lenses.
    – The phone’s modular design allows for accessories like a wallet/stand attachment, enhancing versatility.
    – Powered by the Dimensity 7300 Pro SoC, it has 8 GB of RAM, up to 256 GB of storage, and features a 5,000 mAh battery with 33 W fast charging.
    – Priced at €250 (about $285), the CMF Phone 2 Pro offers a 6.77-inch 1080p display, IP54 rating, NFC, and runs on Android 15 with Nothing OS 3.2.


    The CMF Phone 1 aimed to be a budget-friendly and modular smartphone, but it had some drawbacks. A key issue was its camera setup, which featured a depth sensor as its secondary camera, lacking versatility. With the launch of the Phone 2 Pro, however, it seems that Nothing has made improvements to address these concerns.

    Enhanced Camera Features

    A major feature of the new CMF Phone 2 Pro is its upgraded camera system. This budget smartphone comes equipped with a 1/1.57-inch sensor as its main camera, which claims to capture 64% more light compared to its predecessor. Additionally, it includes a 50 MP telephoto lens, which is quite impressive for a device in this price bracket.

    Modular Design and Accessories

    In addition to the primary and telephoto cameras, the Phone 2 Pro boasts an 8 MP ultrawide camera on the back. The front retains the same 16 MP selfie camera from the CMF Phone 1. The camera capabilities have been further enhanced, as the Phone 2 Pro’s setup is now modular.

    Specifically, Nothing provides interchangeable lenses for the CMF Phone 2 Pro, such as options for fisheye effects and macro photography. The back of this new budget-friendly phone is also modular, and among the fresh accessories is a wallet/stand attachment.

    Performance and Specifications

    Under the hood, the CMF Phone 2 Pro is powered by the Dimensity 7300 Pro SoC, paired with 8 GB of RAM and storage options of up to 256 GB. It also features a 5,000 mAh battery with support for 33 W fast charging (currently, the 100 W Anker Prime charger is priced at $69.99 on Amazon) and 5 W reverse charging.

    Additional features of this new affordable device include a 6.77-inch display with 1080p resolution and a 120 Hz refresh rate, an IP54 rating for water and dust resistance, NFC capability, a microSD card slot, and it runs on Android 15 with Nothing OS 3.2 out of the box. The base model of the CMF Phone 2 Pro is priced at €250, or about $285, and it will be accessible in the US through the Beta Program at $280.

    Source:
    Link


     

  • CMF Phone 2 Pro Teaser: New Color and Camera Samples Revealed

    CMF Phone 2 Pro Teaser: New Color and Camera Samples Revealed

    Key Takeaways

    1. Launch Date: The CMF Phone 2 Pro will be officially launched on April 28.

    2. Design: It features a two-tone back panel in orange and white with removable panels for accessory attachments.

    3. Camera: The phone includes three rear cameras: a 50MP wide-angle, a 50MP telephoto with 2x optical zoom, and an 8MP ultra-wide lens.

    4. Performance: Powered by the MediaTek Dimensity 7300 Pro processor, it offers enhanced performance compared to the previous model.

    5. Essential Key Feature: The phone includes an Essential Key that connects to Essential Space for easy note-taking and audio recording.


    CMF by Nothing has announced that the CMF Phone 2 Pro is set to launch on April 28. Before the official announcement, the company has released important information about the phone’s layout, cameras, and various features.

    Design and Build

    The Phone 2 Pro will showcase a two-tone back panel in a mix of orange and white. The upper section is a lighter hue, whereas the lower part is darker. The back displays four screw points that allow users to take off the panel to attach accessories like a stand, cardholder, or lanyard. CMF branding and certification marks are visible on the bottom half. Similar to the prior model, the Phone 2 Pro is likely to come with a screwdriver included in the package.

    Camera Features

    This new model will be equipped with three rear cameras, which includes a 50MP wide-angle lens featuring a 1/1.57″ sensor, a 50MP telephoto lens capable of 2x optical zoom, and an 8MP ultra-wide lens. The camera samples shared by the brand emphasize capturing light, depth, and detail, indicating an improvement over the original CMF phone.

    Performance and Functionality

    The Phone 2 Pro is driven by the MediaTek Dimensity 7300 Pro processor, which is a minor enhancement over the Dimensity 7300 found in the previous version. The display is said to have uniform bezels and is touted to be the brightest and largest within its Flipkart price range until April 2025, although the specific segment remains unspecified.

    Another exciting feature is the Essential Key, which connects to Essential Space, an AI tool designed for storing notes, ideas, and voice memos. A single press saves content, a prolonged press records audio, and a double tap brings up the saved items. More information is anticipated as we approach the launch date on April 28.


  • CMF Phone 2 Pro Dual-Tone Design Teaser Unveiled

    CMF Phone 2 Pro Dual-Tone Design Teaser Unveiled

    Key Takeaways

    1. CMF Phone 2 Pro is set to launch on April 28, featuring a dual-tone design in orange and white.
    2. The design includes screw placements for replacing the back panel and attaching accessories.
    3. The phone will include a screwdriver, similar to its predecessor, CMF Phone 1.
    4. Camera upgrades include a 50 MP wide-angle lens, a 50 MP telephoto lens with 2x optical zoom, and an 8 MP ultra-wide-angle lens.
    5. The device is powered by the Dimensity 7300 Pro SoC, offering improvements over the original model’s processor.


    CMF Phone 2 Pro is getting closer to its launch on April 28, and the company keeps teasing the design and specs of the device. The latest sneak peek reveals the dual-tone design for the orange and white color options. It’s still not known if there will be additional color choices at launch, but the two colors in the teaser highlight the screw placements that make it possible to replace the back panel and attach various accessories.

    Teasers and Design Elements

    The short teaser released by the official CMF by Nothing account on X displays the orange and white back panels, featuring a lighter shade on the upper half and a darker tone on the lower half. While the camera arrangement was hinted at earlier, this is the first time we get a full view of the back of the CMF Phone 2 Pro. It also reveals the positions of the four screws that secure the back cover.

    The lower section of the phone displays the CMF branding along with regulatory marks. Like its predecessor, CMF Phone 1, the new version is expected to include a screwdriver, suggesting that accessories will also be available at launch.

    Upgrades and Specifications

    Earlier, the company confirmed several camera enhancements along with the SoC for the CMF Phone 2 Pro. The device promises a 50 MP 1/57″ wide-angle lens, a 50 MP telephoto lens with 2x optical zoom, and an 8 MP ultra-wide-angle lens. Regarding the SoC, it will be driven by the Dimensity 7300 Pro, which, at least by its name, represents an improvement over the Dimensity 7300 found in the original CMF Phone.

    CMF by Nothing also showcased camera samples for the Phone 2, accompanied by the phrase, “Built for light, depth and detail.” The cameras appear to be a notable upgrade compared to the first phone, even if the processor may not be as significant a leap forward.

    Source:
    Link

  • Nothing Phone (3) Launch Date Revealed by Carl Pei

    Nothing Phone (3) Launch Date Revealed by Carl Pei

    Key Takeaways

    1. Nothing launched the mid-range Nothing Phone (3a) and Phone (3a) Pro instead of the anticipated Nothing Phone (3).
    2. The Nothing Phone (3) is expected to be unveiled in Q3, likely between July and September.
    3. The design of the Nothing Phone (3) was teased in a promotional video, though details remain secretive.
    4. Anticipated features for the Nothing Phone (3) include a flagship chipset, AMOLED screen with high refresh rate, and at least three cameras.
    5. Another device, the CMF Phone 2 Pro, is set to launch later this month, representing a different market segment.


    When Nothing started hinting at its first smartphone earlier this year, many thought it would unveil the Nothing Phone (3), which many were eagerly waiting for. Unfortunately, that wasn’t true, as they instead launched the mid-range Nothing Phone (3a) (up for grabs on Amazon for $399) along with the Nothing Phone (3a) Pro. Recently, the CEO and founder of Nothing disclosed when fans can expect the Nothing Phone (3) to be available.

    Announcement Details

    The information came to light during an Ask Me Anything (AMA) session hosted by Carl Pei on X. When someone inquired about the release date of the Nothing Phone (3), Pei mentioned it would be in Q3. This indicates that the phone will likely be unveiled sometime between July and September, which means it could be just about five months away if the announcement happens toward the end of the next quarter.

    Teasing the Specs

    Nothing is being quite secretive about the specific features of the Nothing Phone (3) but hasn’t refrained from teasing the gadget whenever possible. In a promotional video discussing the design of the Nothing Phone (3a) series, they sneakily showed a glimpse of the Nothing Phone (3), although it was a bit pixelated.

    Expectations

    The Nothing Phone (3) is anticipated to come with a flagship chipset, an AMOLED screen featuring a high refresh rate, at least three cameras—including one with a telephoto lens—and improved ingress protection compared to the Nothing Phone (2).

    While we patiently await the Nothing Phone (3), there’s another device set to launch later this month that represents a different segment. This device is the CMF Phone 2 Pro, which is the follow-up to last year’s modular CMF Phone 1, as shared by Carl Pei on X.

    Source:
    Link

  • CMF Phone 2 Pro Set to Launch with Exciting Camera Upgrades

    CMF Phone 2 Pro Set to Launch with Exciting Camera Upgrades

    Key Takeaways

    1. The CMF Phone 2 Pro features a MediaTek Dimensity 7300 Pro SoC, which is 10% faster than the standard version.
    2. The camera setup includes a 50 MP wide-angle lens, a 50 MP telephoto lens with 2x optical zoom, and an 8 MP ultra-wide-angle lens.
    3. The camera upgrade from the CMF Phone 1 includes significant improvements over the previous 2 MP depth sensor.
    4. The CMF Phone 2 Pro is positioned in a different market segment, suggesting a higher price point than its predecessor.
    5. The enhanced camera components justify the increased cost of the CMF Phone 2 Pro.


    Nothing has been gradually revealing more details about the CMF Phone 2 Pro ahead of its release. Previous teasers from the brand indicated that it would feature a MediaTek Dimensity 7300 Pro SoC, which is said to be 10% quicker than the standard non-Pro version. Now, we are getting a sneak peek at the most exciting aspects, which are the cameras.

    Camera Features Unveiled

    The Flipkart page for the CMF Phone 2 Pro and a company representative have disclosed that it will be equipped with a 50 MP 1/57″ wide-angle lens, a 50 MP telephoto lens offering 2x optical zoom, and an 8 MP ultra-wide-angle lens. This is a significant upgrade compared to the CMF Phone 1, which featured a 50 MP wide-angle lens alongside a 2 MP depth sensor. This enhancement alone should validate the “Pro” designation for the CMF Phone 2 Pro.

    A New Segment

    Although the telephoto camera on the CMF Phone 2 Pro may not be as remarkable as that on the Nothing Phone 3a Pro, CMF operates in a completely different market. Consequently, this means the CMF Phone 2 Pro will likely have a higher price than its predecessor. However, this is acceptable as it comes with superior camera components that are well worth the extra cost.

    Source:
    Link