Key Takeaways
1. Unique Creation: A Reddit user combined the iPhone SE (3rd generation) internals with the Nokia Lumia 1020 chassis, creating a device called the LumiPhone.
2. Technical Modifications: Significant adjustments were needed, including removing the Lumia’s capacitive buttons to fit the iPhone’s larger display and relocating the Touch ID sensor.
3. Camera Upgrades: The Lumia’s 41MP camera was replaced with the iPhone’s 12MP sensor, and the original flash was swapped for a dual-tone LED flash from the iPhone.
4. Port Changes: The Lumia’s micro USB port was replaced with a Lightning port; however, the headphone jack was removed, and wireless charging was not included.
5. Functionality and Compatibility: The LumiPhone retains a functional camera shutter button, supports CarPlay, has solid network signal, and continues to receive software updates, although Apple Pay is not supported.
The Nokia Lumia 1020 came out almost twelve years ago, while the iPhone SE (3rd generation) hit the market in 2022. Although these smartphones are quite different, one Reddit user has creatively merged them into a single device.
The Creation of the LumiPhone
On the r/hackintosh subreddit, a user named OceanDepth92058 has ingeniously fitted the iPhone SE (3rd generation) 5G internals into the body of the Nokia Lumia 1020. The post clarifies that the only original part from the Lumia 1020 is its chassis; all other components are from the iPhone SE 3. This unique creation has been referred to as the LumiPhone.
Technical Challenges Faced
Crafting the LumiPhone wasn’t straightforward, as it required numerous modifications. The Lumia 1020 features capacitive buttons, but the iPhone SE (3rd gen) showcases a larger display with Touch ID positioned below. To accommodate this, the Lumia’s capacitive buttons were removed in order to fit the bigger screen of the iPhone SE (3rd gen), and the Touch ID sensor was relocated to the back, just below the camera. Despite this change, it still functions as a home button, complete with Force Touch capabilities.
Camera and Ports Adjustments
In terms of the rear camera, the original 41MP sensor from the Lumia 1020 was swapped out for the 12MP sensor from the iPhone SE (3rd gen). Although it looks like the Xenon flash was kept, it has actually been replaced with the iPhone’s dual-tone 4-LED flash. Additionally, the front-facing camera from the iPhone SE 3 was installed on the front of the device.
A significant modification involved replacing the Lumia 1020’s micro USB port with the Lightning port from the iPhone SE (3rd gen). Unfortunately, the headphone jack could not be kept, as integrating an audio jack into an iPhone presents a monumental challenge, nor was wireless charging included.
Additional Features and Compatibility
Another fascinating change is the inclusion of the camera shutter button from the Lumia 1020. This button is still functional for taking photos, but it is also connected to the volume switch, allowing it to serve as an additional volume down button. The original poster mentioned that while Apple Pay is not supported, CarPlay works just fine. The network signal is reportedly solid, and the LumiPhone continues to receive software updates.
In summary, this modification is quite intriguing. Although it doesn’t qualify as true hackintosh (running macOS on non-Apple hardware), it still meets the criteria of having Apple software (iOS) operating on hardware not produced by Apple.
Source:
Link
Leave a Reply