Category: All News

  • Huawei Watch Fit 5 and 5 Pro Leak Details Before Launch

    Huawei Watch Fit 5 and 5 Pro Leak Details Before Launch

    Key Takeaway

    1. The Huawei Watch Fit 5 features a 1.82-inch AMOLED display with up to 2,500 nits brightness, while the Watch Fit 5 Pro has a 1.92-inch display with 3,500 nits brightness and a sapphire glass cover.
    2. Both models offer up to 10-day battery life, with the Pro version including additional features like GPS, NFC, and an ECG function.
    3. The Watch Fit 5 is expected to cost around €199 ($235), and the Pro version around €299 ($353), with the Pro having a more premium build and extra capabilities.

    Overview of Huawei Watch Fit 5 Series

    The Huawei Watch Fit 4 series dropped last year and it looked pretty similar to the Apple Watch Ultra series. Huawei now planning to update their lineup with the Watch Fit 5 and Fit 5 Pro, they seem to follow quite closely the style Apple does with their watch designs. Some leaks coming out hinting at how they will look, their specs, and prices before they officially announcement. Seems like Huawei want these to be competitive in the smartwatch market with some interesting features and better designs.

    Design and Display Features

    The Watch Fit 5 is said to come with a 1.82-inch AMOLED screen boasting a resolution of 480×408, giving about 347 ppi. It will be super bright, reaching up to 2,500 nits on 80% of the screen area, which is covered with Li-AL-Silicon glass. The body of this watch will be fully aluminum, and it only weigh 27.5 grams, making it light and comfy to wear. For the other model, the Fit 5 Pro, it features a slightly bigger 1.92-inch display but with the same resolution, thus slightly lower pixel density. The Pro version’s display can go even brighter at 3,500 nits. Both watches sport a sleek, modern look that aligns with current trends, but the Pro’s premium design makes it feel more luxurious.

    Battery Life and Performance

    According to the leaks, both watches will house a 471 mAh battery. They’re expected to last about 10 days on a full charge, and around seven days under typical usage. With the always-on display mode enabled, you might get roughly four days out of them before needing to recharge. They are also supposed to be IP6X certified for water and dust resistance which means they can stand up to some tough environments and weather. The sensors packed in are quite advanced, including TruSense features, accelerometers, gravity sensors, heart rate monitors, body temperature sensors, magnetometers, barometers, and light sensors. These make the watches versatile and suitable for fitness tracking and everyday health monitoring.

    Premium Build and Additional Features of Pro Model

    The Watch Fit 5 Pro is built for those who want a more luxurious look and feel, with an aluminum main frame combined with a titanium outer shell. It will be protected by sapphire glass, making it more resistant to scratches. Its display measures 1.92 inches, which is a tad bigger than the standard version, but it maintains the same resolution. That’s why the pixel density is a little lower, yet it compensates with extreme brightness of up to 3,500 nits. Connectivity options for the Pro include Bluetooth 6.0, NFC, and GPS, add to its appeal. It also features an IP6X rating and is rated for immersion up to 40 meters underwater. Additional special features like an ECG function and a depth sensor position the Pro model as a more health-focused and durable smartwatch.

    Pricing and Availability

    Sources report that the Watch Fit 5 will come in colors like black, white, silver/green, and purple, priced at approximately €199, which is about $235. The Pro version will be available in black, white, and orange, costing around €299 or roughly $353. These prices are a bit more than what their predecessors served, indicating some upgrades and premium features included. There’s no official release date announced yet, but since the previous models launched in May, it’s probable we could see these new watches very soon, perhaps in the coming months.

    Sources
    Tags: , ,
  • Motorola Edge 70 Pro Coming Soon with 6500mAh Battery & Three 50MP Cameras

    Motorola Edge 70 Pro Coming Soon with 6500mAh Battery & Three 50MP Cameras

    Key Takeaway

    1. The Motorola Edge 70 Pro features a large 6,500 mAh battery with 90W fast charging, promising up to two days of usage.
    2. It is powered by the MediaTek Dimensity 8500 chip, paired with up to 12 GB of RAM.
    3. The device has a 6.8-inch AMOLED display with 144Hz refresh rate and HDR support.
    4. Camera setup includes three 50 MP sensors: selfie, main, and ultra-wide-angle.
    5. It runs on Android 16, with plans for at least three major updates and five years of security patches.

    New leak about Motorola Edge 70 Pro

    Motorola’s upcoming smartphone, the Edge 70 Pro, was just previewed on Flipkart’s teaser page before its official release scheduled for Wednesday, April 22, 2026. The device looks pretty similar to its sibling, the Motorola Edge 70, which is priced at $599, but this new model is slightly thicker, likely to accommodate bigger battery components.

    Battery and Design

    The standout feature here is definitely the massive 6,500 mAh battery, which promises two days of usage according to Motorola, but that can vary depending on how u use it. The Edge 70 Pro supports rapid charging at 90 watts through its USB-C port, making recharges quick. The teaser page showcases the device in three stylish colors: Pantone Lily White with a marble finish, Pantone Tea in green, and Pantone Titan in blue, giving it a chic look for different tastes.

    Internal Specifications and performance

    Under the hood, this model runs on the MediaTek Dimensity 8500, a fresh 4nm ARM processor equipped with eight ARM Cortex-A725 cores. One of these cores can reach up to 3.4 GHz, three others run at 3.2 GHz, and the remaining four are efficiency cores clocked at 2.2 GHz. The device uses a vapor chamber to keep the processor cool and comes with as much as 12 GB of RAM for smooth multitasking.

    Display and Cameras

    The phone features a large 6.8-inch AMOLED display boasting HDR brightness peaking at 5200 nits and a fast 144 Hz refresh rate, ensuring sharp visuals and smooth scrolling. The camera setup is impressive for its mid-range category, including a 50 MP selfie camera, a 50 MP main sensor with Sony LYT-710, and a 50 MP ultra-wide-angle lens. It runs on Android 16, with promises of receiving at least three major Android updates and five years of security patches for ongoing security upgrades and feature enhancements.


    Sources

    Tags: , ,
  • GameSir Launches Three New Tarantula Controllers for Xbox and PC

    GameSir Launches Three New Tarantula Controllers for Xbox and PC

    Key Takeaway

    1. Three new Tarantula controllers are announced: Tarantula Pro for Xbox, Tarantula 8K PC, and Tarantula Ultra 8K PC, all featuring symmetrical thumbsticks.
    2. The Tarantula Pro is wired for Xbox and PCs with features like customizable buttons, vibration motors, and RGB lighting, priced at $69.99.
    3. The Tarantula 8K PC and Ultra 8K PC are wired and wireless, respectively, with high polling rates (up to 8,000Hz), macro support, and advanced customization options.
    4. The Ultra 8K PC offers the highest performance with both wired and wireless connectivity, touch-sensitive buttons, and dual gyroscopes, but lacks an audio jack.
    5. None of the controllers are compatible with Nintendo Switch, Android, or iOS, except the Pro, which supports these platforms via a gear mechanism.

    GameSir Announced Three New Tarantula Controllers

    GameSir are launching some new controllerse that look really cool, they are called Tarantula series. These new game controllers been revealed to include three models, which are the Tarantula Pro for Xbox, Tarantula 8K PC, and the Tarantula Ultra 8K PC. All these controllers feature symmetrical thumbsticks similar to PlayStation controllers. Two of these models you can preorder right now, but the third will be available later on.

    Details of The Tarantula Pro for Xbox

    This controller is wired and works with Xbox consoles including the Xbox One, just like it says on the name. It can also connect with PCs and Steam, so it’s quite versatile. the specs include Mag-Res TMR sticks, micro switch ABXY buttons, and a mechanical D-Pad. It features a 1,000Hz polling rate and a 6-axis gyroscope, but these last two only work when connected to PCs.

    Features & Connectivity

    • Wired connection via detachable USB-C cable
    • RGB lighting & audio jack
    • Weighs 235 grams
    • Compatible with GameSir Nexus software
    • $69.99 in price, available in white

    It has special dual-mode triggers with switches for micro switch trigger mode or Hall Effect analog mode. There are also two customizable back buttons with unlock switches, plus seven other buttons you can set to your liking. The grips and triggers are textured and laser-engraved for better grip, plus there are vibration motors for haptic feedback. Ready to ship soon, pre-order now to get it in June.

    The New Tarantula 8K PC Controller

    This one’s also wired but just for PC, and it sports a bright orange and black color theme. Equipped with Gen 2 Mag-Res TMR sticks, it offers dual-mode triggers like the Pro model, along with macro recording up to 32 steps and turbo settings at three levels: 10Hz, 20Hz, and 30Hz. The really impressive thing here is its 8,000Hz polling rate, which can be tuned to four different levels. It has nine customizable buttons and also features a 6-axis gyroscope, with RGB lighting and an audio jack.

    Comparison and Price Details

    • Lightweight at 180 grams (lighter than the Pro)
    • No vibration motors unlike the Pro
    • $69.99 pricing, preorder now
    • Expected to ship in June 2026

    This controller operates via GameSir Connect Software, unlike the previous one which uses Nexus. It is designed mainly for PC gamers who want precision. Its lighter weight is because it doesn’t have vibration motors, making it more streamlined. With the same price point, it’s a tempting option for those who prefer a wired setup but don’t need vibration feedback.

    The Premium Tarantula Ultra 8K PC

    On the high end is the Tarantula Ultra 8K PC, available only for PC and offering both wired and wireless options through USB-C and 2.4GHz respectively. It’s got the latest Mag-Res TMR sticks, dual trigger stops, and tactile D-pad, making it very advanced. The buttons even have capacitive touch sensors, which is quite innovative, although that isn’t fully explained yet. It’s got an 8,000Hz polling rate, with a response time of just 0.5 milliseconds whether wired or wireless, designed for ultimate speed.

    Extra Features and Limitations

    • Up to 32-step macro support
    • 9 customizable buttons & dual gyroscopes
    • RGB lighting and textured grips with dual motors
    • Compatible with GameSir Connect software and app
    • No built-in battery, charging station sold separately
    • Lacks an audio jack

    This controller combines high speed and precision, with more features like macro support and dual sensors. The touch sensors on buttons add a futuristic aspect, but it’s still missing some details like the battery capacity. More information about this premium model is expected to be revealed this summer.

    Additional Notes & Compatibility Limitations

    Sadly, none of these Tarantula controllers are suitable for Nintendo Switch, Android, or iOS. If you need a controller that can work with these platforms, the Tarantula Pro is a good option, because it can connect wirelessly and has a gear mechanism that switches face button layouts between Nintendo and Xbox configurations. This versatility makes the Tarantula Pro quite popular among those who use multiple systems.

    Sources
    Tags: , ,
  • Oppo Announces Global Launch of Luxury Smartwatch with 16-Day Battery

    Oppo Announces Global Launch of Luxury Smartwatch with 16-Day Battery

    Key Takeaway

    1. Oppo will unveil the Find X9 Ultra, Pad 5, Watch X3, and Enco Clip2 earbuds at a major global launch event in less than a week.
    2. The Watch X3 is expected to be priced around €379 (~$449), similar to its predecessor, and will feature specifications comparable to the Pixel Watch 4 and Galaxy Watch 8.
    3. Oppo is hinting at multiple SKUs for the Pad 5 and confirming the Watch X3’s global availability and pricing ahead of the official launch.

    Upcoming Oppo Devices and Rumors

    Oppo is planning to host a big global event very soon where they will reveal several new gadgets. One of the main devices expected to launch is the Find X9 Ultra, along with the Pad 5 and Watch X3, plus the Enco Clip2 earbuds. These products are set to be officially announced on April 21, but Oppo is already giving us some sneak peeks.

    Early Hints and Price Indications

    Oppo has already listed two SKUs for the Pad 5 on their website and also started reservations for the Find X9 Ultra. Along the way, they seem to have confirmed the price for the Watch X3 too. For example, the Watch X2 launched at €379 (~$449) in the Eurozone, but it has dropped to €279 (~$329) now. From the current info from Oppo’s German and Spanish sites, looks like the Watch X3 will cost just like the older model, around €379 (~$449).

    Design and Compatibility Information

    This price applies to the Watch X3 in Misty Titanium and Obsidian Black, which both come with 2 GB of RAM and 32 GB of storage. Based on similar releases like the Watch X2 and Watch X2 Mini, it looks like the Watch X3 will also run on Wear OS outside China. The device should be competing with the Pixel Watch 4, Galaxy Watch 8 and the Galaxy Watch Ultra, which currently are around $649 on Amazon. It promises a more sleek and luxurious finish compared to the latest from Google and Samsung. The watch’s display measures 1.5 inches and uses LTPO AMOLED technology, and it packs a 646 mAh battery, estimated to last up to 16 days on a full charge. For more details about the Watch X3’s Chinese version, you can check our previous coverage.


    Sources

    Tags: , , , ,
  • Fake Samsung 990 Pro SSDs detected in Europe

    Fake Samsung 990 Pro SSDs detected in Europe

    Key Takeaway

    – Counterfeit Samsung 990 Pro SSDs have been identified in both Japan and Germany, with the German fake being non-functional.
    – The counterfeit SSDs mimic packaging and labels but reveal discrepancies like poorer print quality and different PCB color.
    – Genuine Samsung SSDS can be distinguished using tools like Samsung Magician, which can identify non-authentic units even if they appear operational.

    Counterfeit Samsung 990 Pro Found in Germany

    Recently, there was a tight situation found in Germany where some fake SSDs were sold pretending to be the real Samsung 990 Pro, which normally costs around $319 for 1 TB. The incident is similar to what was seen in Japan, where cheaper SSDs with a fresh packaging were sold at the same high price as genuine ones. But in Germany, the fake SSDs are more obvious because they don’t even work properly.

    Comparison of Packaging and Construction

    A member from the ComputerBase community explains that they ordered two Samsung 990 Pros from an online shop in Austria earlier in April. The packaging seemed almost identical to the real, but when looked at closely, the print quality was lower, and some symbols like the CE mark were placed differently. After opening, it was clear these were fakes, especially because the stickers looked copied but the SSDs were on a blue circuit board, unlike the usual black board of authentic Samsung 990 Pro units.

    Detection and Verification by Software

    Connecting these SSDs to a computer shows they are recognized by programs like CrystalDiskInfo, but the details don’t match real Samsung devices — the memory isn’t correct and firmware IDs are off. Additionally, Samsung Magician software labels these SSDs as “non-Samsung”, confirming they are counterfeit. If you bought one lately, it’s best to run Samsung Magician or similar tools to verify its authenticity, because as in Japan, some fake SSDs are even functional and may appear normal at first.

    The retailer in Austria is now investigating where they got these SSDs from, but how these counterfeit drives entered the market without being caught remains a mystery. This incident shows the importance of checking purchases carefully to avoid fake products.

    Sources
    Tags: , , ,
  • DJI Osmo Pocket 4 Footage Teases New Cinematic Video Mode Before Launch

    DJI Osmo Pocket 4 Footage Teases New Cinematic Video Mode Before Launch

    Key Takeaway

    1. The DJI Osmo Pocket 4 teaser hints at a new “slow shutter” mode for cinematic long exposure effects.
    2. The device may feature a dedicated toggle for slow shutter mode, accessible via a new “Custom” (C) button.
    3. A dual-camera Osmo Pocket 4 Pro with 4x optical zoom is rumored to be released as early as June 2026.

    Exciting Sneak Peek of DJI Osmo Pocket 4

    Just ahead of its global reveal, a new teaser for DJI Osmo Pocket 4 has been released, bringing us into a vibrant neon cityscape of Hong Kong. The captivating footage features a cinematic slow shutter effect, making the city lights and bustling streets seem to blend into one another in a mesmerizing way.

    Understanding Slow Shutter Technique in Cinematography

    If you not familiar with filmmaking techniques, slow shutter (or “long exposure”) in videos means the camera’s “eye” stays open longer for each snap. Instead of capturing sharp images, it creates trails of light from moving objects, like the streaks from car headlights or the blurring of foot traffic. Normally, videos run at 24 or 30 frames per second, but this effect intentionally blurs anything in motion to add an artistic touch.

    Potential Features of Osmo Pocket 4

    According to DJI, the teaser hints at a new feature called a “slow shutter mode,” which likely can be turned on or off quickly. This might be activated through the new “Custom” (C) button on the Pocket 4, allowing users to switch modes instantly to capture unique cinematic scenes without missing a beat. The focus on quick accessibility indicates DJI aims to make creative filming seamless and spontaneous.

    Upcoming Versions and Market Expectations

    While the primary launch scheduled for tomorrow concentrates on the standard model, rumors and leaks about the Osmo Pocket 4 Pro are circulating. Sources suggest a dual-camera setup with a 4x optical zoom might be introduced as soon as June 2026. This potential upgrade could appeal to professional videographers seeking more versatile shot options.

    Mark Your Calendar for the Launch

    The DJI Osmo Pocket 4 officially becomes available on April 16, 2026, by 12:00 PM GMT. Enthusiasts and new users alike are eagerly waiting to see what makes this compact stabilizer stand out among today’s portable camera devices.

    Sources
    Tags: , ,
  • Xiaomi’s New High-End Smartphone Rumored with Snapdragon 8 Elite Gen 5

    Xiaomi’s New High-End Smartphone Rumored with Snapdragon 8 Elite Gen 5

    Key Takeaway

    1. Xiaomi is preparing to launch a new flagship smartphone, likely the Xiaomi 17 Max or Xiaomi 17S Plus/Max, in China by May 2026.
    2. The device is expected to feature a Qualcomm Snapdragon 8 Elite Gen 5 chipset, a 6.9-inch display, and a 200 MP primary camera.
    3. The smartphone will compete with high-end devices like the Galaxy S26 Ultra and has been certified by the SRRC, indicating its upcoming release.
    4. International availability details have not been announced yet.

    Upcoming Xiaomi Smartphone: What We Know So Far

    Just ah little over a month after Xiaomi releaseed some high-end gadgets like a luxury smartwatch and a lightweight laptop with Intel Panther Lake, there’s now a whisper about a new flagship smartphone. According to a recent Chinese SRRC certification, the tech giant might be ready to go back to its smartphone roots, with a fresh model lined-up for release.

    Certification Leaks Some Details

    A couple of sources have spotted the SRRC certifying a device called ‘2605EPN8EC’ in China. Based on it model number, it seems like Xiaomi plan to debut this smartphone in May 2026. Yet, nothing is confirmed yet, and it remains to be seen if this date turns out to be accurate.

    What Could This Smartphone Be?

    The model number suggests that it’s a high-end phone, possibly the Xiaomi 17 Max or Xiaomi 17S Plus/Max. Rumors have it, this model will pack some serious tech like a Qualcomm Snapdragon 8 Elite Gen 5 chipset, a big 6.9-inch display, and a massive 200 MP main camera. If true, this phone would sit firmly against other top-tier devices in the market.

    Competitive Landscape and Expectations

    This new Xiaomi device should be in direct competition with the Galaxy S26 Ultra, which currently is listed around $1,299 on various sites locally. Observers on Weibo have even compared it with the recently launched Vivo X300s, which made its debut in China not long ago. As of now, there’s no information on whether this smartphone will also go international, so for now, it’s just a waiting game.


    Sources

    Tags: , , , ,
  • MSI Launches 2026 Gaming Laptops with Nvidia GeForce RTX 5070 12GB

    MSI Launches 2026 Gaming Laptops with Nvidia GeForce RTX 5070 12GB

    Key Takeaway

    1. MSI introduced new gaming laptops featuring Nvidia RTX 50 series GPUs and Intel Arrow Lake and Raptor Lake processors.
    2. The Crosshair 16 Max HX E2WGXK is set to be available exclusively with an unannounced Nvidia GeForce RTX 5070 Laptop GPU 12GB GDDR7.
    3. MSI’s new models will include updated processors such as Core Ultra 7 251HX, Core Ultra 9 290HX Plus, and Core Ultra 9 275HX.

    New Gaming Laptops Unveiled by MSI

    Today, MSI revealed a bunch of new gaming laptops that are gona hit worldwide markets. These models, including the Cyborg, Crosshair, Raider, and Titan series, are powered with Nvidia RTX 50 series GPU’s and are paired with Intel’s latest Arrow Lake and Raptor Lake CPUs. It’s quite an exciting range for gamers and tech enthusiasts who looks for power and performance in their machines.

    Hidden Details About Nvidia’s Unannounced GPU

    In an interesting twist, MSI’s announcement, kinda slips in a hint about a Nvidia GPU that hasn’t been officially announced yet, the RTX 5070 12GB GDDR7. Specifically, MSI states that the Crosshair 16 Max HX E2WGXK will be exclusive to this new, high-end GPU. The specs and exact details remain secret for now, leaving lots of speculations absent which keeps this reveal pretty much a mystery for the moment.

    What We Know So Far

    Looking back, MSI’s earlier Max HX models, specifically the E2WFK and E2WGK versions, came with 8GB versions of either the RTX 5060 or RTX 5070 GPU. The current models are priced around $1,749, although that’s on Amazon and might vary. As for this new potential RTX 5070, MSI didn’t share so much, only confirming that it’ll have 12GB GDDR7 memory, a promising spec for gamers craving high performance.

    Upcoming Hardware Specs and Expectations

    MSI also announced that alongside this mysterious GPU, new processors — Core Ultra 7 251HX and Core Ultra 9 290HX Plus — are also coming, together with the existing Core Ultra 9 275HX processors. Maybe Nvidia’s just about ready to announce their new GPU, and MSI is prepping for the launch with these new laptops. No word yet on when you’ll actually be able to buy the Crosshair 16 Max HX E2WGXK, so fans just gotta wait a little longer.


    Sources

      Tags: , , , ,
    • Google Wallet Gets Major Redesign for Better Navigation

      Google Wallet Gets Major Redesign for Better Navigation

      Key Takeaway

      1. The Google Wallet app has been redesigned with a new grid layout for easier viewing of multiple cards and passes.
      2. A new favorites feature allows users to pin important cards to the home screen and manage them with drag-and-drop.
      3. Updated card details emphasize visuals over text, enhancing overall aesthetics and user experience.
      4. Improvements include a search function and advanced sorting options for better pass management.
      5. The rollout is gradual, with early feedback generally positive but some features still feeling somewhat cumbersome.

      Google Wallet Gets a Fresh Look and Feel

      Recently, Google announced that its Wallet app will be getting a pretty big update, according to Android Authority. Instead of the old list style, you’ll now see a neat grid layout, which makes browsing through your cards seem more visual and less cluttered. This change is alot better than endless scrolling, letting you glance at multiple cards, tickets, or passes all at once. It’s quite useful especially if you got loads of loyalty cards and boarding passes stored. The new design also enhances how individual cards appear — with bold colors and artsy graphics, instead of dull text and tiny details. Important info like membership numbers now sit in smaller fonts, keeping things looking clean and stylish.

      Making Your Favorites Even Simpler

      The new update introduce another handy feature—favorites. Now, you can marked your most used cards with a star icon, and pin them right to your home screen for quick access. This means you won’t wasting time digging through your collection. Plus, you can arrnage these favorites easily with drag-and-drop system. That would make the entire process more customizable and user friendly. Additionally, Google has improved how you manage your passes and cards. Searching for specific passes is easier thanks to a new search option, and you now have extra sorting choices to get your passes in order. Though, not everything’s perfect just yet, some users report that adding new favorites still feels a little clunky and takes more steps than it probably should.

      Rolling Out Gradually with Good Feedback

      The update is rolling out slowly across devices, so not everyone will see the new Wallet app immediately. Even with some rough edges like the favorites feature, most early feedback from Reddit users has been pretty positive. People liked how the new layout looks, making it easier to read and use. Many see it as a much-needed refresh for the app, long overdue for a modern upgrade. Overall, it’s a step forward, even if a few kinks are still being ironed out.

      Sources
      Tags: , , ,
    • Toyota CUE7 Basketball Robot Hits 25-Meter Shots

      Toyota CUE7 Basketball Robot Hits 25-Meter Shots

      Key Takeaway

      1. Toyota’s humanoid basketball robot, CUE7, has demonstrated improved performance, including smoother movements and the ability to score from 25 meters away.
      2. The CUE series has evolved since 2017, initially as a side project by Toyota employees, now serving as a platform for AI, sensor technology, and motion control development.
      3. Toyota aims to expand its robotics initiatives, positioning itself as a competitor to companies like Tesla and Unitree in fields such as medical care, logistics, and assistance systems.

      Recent advancements in humanoid robot technology reveal impressive feats

      Just recently, a humanoid robot achieved an extraordinary top speed of 10.1 m/s in a 100-meter dash, showcasing rapid progress. Furthermore, robots capable of playing basketball are now becoming common enough not to impress anymore. Yet, Toyota’s new update of its basketball robot, the CUE7, pushes the limits further, suggesting there’s still many uncharted territories in robotics. The latest footage shared by WELT on YouTube shows this remarkable machine in action, capturing widespread attention.

      Evolution from earlier models to cutting-edge performance

      Looking back, previous versions of these robots have already shown impressive feats. For example, CUE3 managed to make 2,020 free throws in succession, a remarkable number for a robot. Additionally, CUE5 broke a Guinness World Record with a basketball shot nearly 25 meters (82 feet) away, specifically 24.55 meters (80.5 feet). Now, CUE7 aims to surpass these automated accomplishments by scoring from distances up to 25 meters, while sporting a sleek and smoother movement profile, making it a more refined player.

      Design features and capabilities of the new CUE7

      The robotic design of CUE7 has been optimized for improved functionality. Unlike the Unitree G1, which also plays basketball, CUE7 uses rollers on its feet to improve mobility, and its gripping hands are especially crafted to handle and toss a basketball more effectively. Standing at 2.19 meters (7.2 feet) tall, this larger size might give it an edge over smaller competitors in a match, providing better reach and stability.

      Broader implications for robotics in various industries

      This project is more than mere entertainment; it acts as a testing ground for new tech in artificial intelligence, sensors, and motion control. Since its inception in 2017, the CUE project has evolved from a voluntary side endeavor to a significant research platform. The technologies developed here could be adapted for use in fields like healthcare, logistics, and even personal assistance. Sources indicate that Toyota plans to expand its efforts in robotics, aiming to position itself as a main competitor against firms like Tesla and Unitree in this rapidly growing sector.

      Sources
      Tags: , ,