Tag: Snapdragon W5 Gen 1

  • OnePlus Watch 4 Leaks Reveal Disappointing Upgrades and Variants

    OnePlus Watch 4 Leaks Reveal Disappointing Upgrades and Variants

    Key Takeaways

    1. The OnePlus Watch 4 has received approval from EMVCo and is closer to release.
    2. It will be powered by the Snapdragon W5 Gen 1 SoC, despite the availability of the newer W5 Gen 2.
    3. The smartwatch features a 1.5-inch LPTO AMOLED display with a resolution of 466 x 466 and a size increase to 47 mm.
    4. The battery remains at 646 mAh, but the IP rating may improve from IP68 to IP69 for better water resistance.
    5. The smartwatch is expected to run on WearOS 6.0, despite initial mentions of WearOS 5.0.


    Courtesy of a well-known leaker on X/Twitter, we have learned that the OnePlus Watch 4 is getting closer to release, as it has received approval from EMVCo. The leaker, @sudhanshu1414, also shared a variety of details about the smartwatch’s specifications.

    Processor Details

    To start, it is said that the OnePlus Watch 4 will be powered by the Snapdragon W5 Gen 1 SoC. This chipset, which was introduced in 2023, includes four Cortex A53 cores that can reach up to a boost frequency of 1.7 GHz. Even though the W5 Gen 2 is available now, OnePlus seems to have chosen to stick with the older version for this smartwatch.

    Display and Size

    The smartwatch will feature a 1.5-inch LPTO AMOLED screen, boasting a resolution of 466 x 466, which looks to be the same as what the OnePlus Watch 3 offers (currently priced at $345 on Amazon). The size has increased slightly to 47 mm, suggesting a potential increase in bezel thickness if the display remains unchanged.

    Battery and IP Rating

    The 646-mAh battery will not be receiving any upgrades, either. It seems the main improvement will be the IP rating, which could be upgraded from IP68 to IP69. This upgrade would enable the watch to withstand high-pressure and high-temperature water streams.

    In the EMVCo database, two different models of the OnePlus Watch 4 have been identified—one labeled XL907 and the other XL905. It might indicate that OnePlus is preparing a higher-end or a more budget-friendly option for the smartwatch, but we will have to wait for confirmation.

    Software Confusion

    Sudhanshu also mentioned that the smartwatch will run on WearOS 5.0, but the EMVCo listing clearly indicates WearOS 6.0. Most likely, the latter is correct since the Android 16-based WearOS 6 has been available for some time now.

    Source:
    Link


     

  • Google Pixel Watch 4 Leak: Battery Life Upgrades and More Changes

    Google Pixel Watch 4 Leak: Battery Life Upgrades and More Changes

    Key Takeaways

    1. The Pixel Watch 4 is expected to use the Snapdragon W5+ Gen 1 chipset, similar to previous models.
    2. Battery life improvements include 5.9% for the 41 mm model (325 mAh) and 8.3% for the 45 mm model (455 mAh).
    3. An M55 co-processor will enhance AI performance up to 5 times while consuming less energy, enabling up to 30 hours of battery life.
    4. Display brightness is set to increase from 2,000 nits to 3,000 nits.
    5. The Pixel Watch 4 will feature a charging capability on its side, allowing it to function as a bedside clock.


    New information about the Pixel Watch 4 has surfaced online, right as Google is getting ready to announce its upcoming launch event. Coincidentally, this new data about Google’s future smartwatches comes shortly after a leak disclosed information about the smartwatch chipset selected by Google.

    Expected Chipset

    As we previously mentioned, Google is expected to stick with the Snapdragon W5+ Gen 1 chipset, which is already found in the Pixel Watch 2 and Pixel Watch 3 (currently priced at $399.99 on Amazon). However, reports from Android Headlines indicate that both sizes of the Pixel Watch will see a slight improvement in battery life this year.

    Battery Life Enhancements

    According to the website, the 41 mm and 45 mm models will feature batteries of 325 mAh and 455 mAh, respectively. This means about a 5.9% enhancement for the 41 mm variant and an 8.3% upgrade for the larger 45 mm version.

    In addition, Android Headlines claims that Google will launch an M55 co-processor that boasts up to 5 times better AI performance compared to the Snapdragon W5+ Gen 1, while consuming less energy. Consequently, Google is expected to promote the Pixel Watch 4 as capable of up to 30 hours of battery life with its always-on display (AoD) feature activated. The 45 mm model will also enjoy an extra 10 hours of battery life.

    Display Brightness and New Features

    Google is likely to increase the brightness of the displays from 2,000 nits to 3,000 nits for the Pixel Watch 4 lineup. Additionally, the company is expected to roll out other minor changes, such as the ability to charge the smartwatch on its side, allowing it to function as a bedside clock when in a dock. Currently, the Pixel Watch 4 is set to launch on August 20, available in five colors, alongside four Pixel 10 smartphones.

    Source:
    Link


     

  • Google Pixel Watch 4 Rumored to Use Same SoC as Watch 2

    Google Pixel Watch 4 Rumored to Use Same SoC as Watch 2

    Key Takeaways

    1. The Google Pixel Watch 3 improves performance but uses the same Snapdragon W5 Gen 1 chip as its predecessor.
    2. The Pixel Watch 4 will also utilize the Snapdragon W5 Gen 1, as Qualcomm’s next-gen SoC is not yet ready.
    3. Qualcomm is developing a new wearable SoC, codenamed “aspen,” which will differ from existing models.
    4. The Pixel Watch 4 is expected to feature an upgraded battery, with the 41 mm model having a 327 mAh battery.
    5. The 45 mm version of the Pixel Watch 4 is set to maintain a 459 mAh battery, the same as the 45 mm Pixel Watch 3.


    The Google Pixel Watch 3 has recently been released, showing some enhancements over the previous model, mainly with its performance. It utilizes the same Snapdragon W5 Gen 1 chip found in the second-generation smartwatch from Google, and it appears that the forthcoming Pixel Watch 4 will also use this same SoC.

    No Upgrade in SoC for Pixel Watch 4

    According to a source close to the situation, Android Authority indicates that the Pixel Watch 4 won’t upgrade its SoC. The reasoning behind Google’s choice to maintain the Snapdragon W5 Gen 1, which powers both the second and third models, is likely due to Qualcomm’s next-gen wearable SoC still not being ready for release.

    Qualcomm’s Future Plans

    There are reports that Qualcomm is making good progress on their next-generation wearable SoC, which is rumored to carry the codename “aspen.” Previous information suggests this new chip will be different from Qualcomm’s existing ones, distinguishing itself from other wearable processors in their lineup.

    Battery Improvements Expected

    Moving back to the Pixel Watch 4, even though there seems to be no change in the SoC, it looks like the battery will see an upgrade. Specifically, earlier reports mention that the 41 mm version will feature a 327 mAh battery, while the 45 mm model is expected to have a 459 mAh battery. For comparison, the 41 mm Pixel Watch 3 (WiFi version, currently priced at $269.99 on Amazon) has a 307 mAh battery, and the 45 mm version also comes with a 459 mAh battery.

    Source:
    link

  • OnePlus Unveils Affordable Watch 3 with Enhanced Features

    OnePlus Unveils Affordable Watch 3 with Enhanced Features

    Key Takeaways

    1. New Model Introduction: OnePlus has launched the 43 mm Watch 3, a smaller and more affordable version compared to the 46 mm model.

    2. Design Changes: The Watch 3 features a lighter build at 37.8 grams and a smaller 1.32-inch display, compared to the 1.5-inch screen of the larger version.

    3. Same Performance Specs: Both the 43 mm and 46 mm models use the Snapdragon W5 Gen 1 SoC, with 32 GB storage and 2 GB RAM.

    4. Reduced Battery Life: The 43 mm Watch 3 offers a maximum of 7 days of battery life with power-saving mode, while the 46 mm can last up to 16 days.

    5. Pricing and Availability: The Watch 3 is priced at $299.99, with no promotional discounts, but a trade-in program is available.


    OnePlus has introduced a range of new accessories, including the 43 mm Watch 3. This model is smaller and a bit more budget-friendly compared to the standard 46 mm version. In terms of specifications, they are the same as the Oppo Watch X2 mini, but even though the OnePlus device may be a rebranded version, it will be readily accessible globally.

    Design and Features

    In relation to the 46 mm model, the latest Watch 3 boasts a more slender dial and a lighter build, tipping the scales at 37.8 grams (which is approximately 0.833 lbs). Because of its compact design, the display on this new OnePlus smartwatch is also reduced in size. To be exact, it has a 1.32-inch display, while the larger version sports a 1.5-inch screen.

    Performance and Specs

    However, both watch models operate on the same system-on-chip (SoC). The 43 mm OnePlus Watch 3 is equipped with the Snapdragon W5 Gen 1, paired with the BES2800 MCU chipset. This Qualcomm smartwatch SoC also includes 32 GB of storage and 2 GB of RAM.

    Battery Life and Tracking Capabilities

    The battery life has, unfortunately, decreased. OnePlus claims that the 43 mm Watch 3 can endure up to 7 days with the power-saving mode activated. In contrast, the 46 mm version can last for as long as 16 days on a single charge.

    When it comes to tracking fitness, the 43 mm Watch 3 supports more than 100 sports modes and can automatically detect six types of activities. Its health tracking features are comparable to other top-tier smartwatches, but OnePlus has mentioned that the 60-second health check-in is missing from this model due to the absence of a temperature sensor.

    Pricing and Availability

    Regarding pricing, the OnePlus Watch 3 43 mm is listed on the official website for $299.99, while the 46 mm variant is priced at $349.99. Unlike the Buds 4, there is no promotional discount code offered for the new smartwatch, however, the company does have a trade-in program available.

    Source:
    Link


     

  • Oppo Watch X2 Mini: Compact Smartwatch with 1,000 Nit Display

    Oppo Watch X2 Mini: Compact Smartwatch with 1,000 Nit Display

    Key Takeaways

    1. The Watch X2 Mini has a smaller 43 mm case and a redesigned layout compared to the 47 mm Watch X2.
    2. It features a 1.5-inch AMOLED display with a resolution of 466 x 466 pixels and a peak brightness of 1,000 nits.
    3. The smartwatch is powered by Qualcomm’s Snapdragon W5 Gen 1 chipset, allowing for up to 7 days of battery life, though intensive use can reduce this to 1.5 days.
    4. The Watch X2 Mini includes GPS and an accurate heart rate sensor, but lacks ECG functionality.
    5. Pricing for the Watch X2 Mini starts at CNY 1,799 (~$247) in China, with a premium 18k gold version costing up to CNY 2,099 (~$288).


    The Watch X2 Mini has been unveiled alongside the Pad 4 Pro, Find X8 Ultra, and Find X8s series during a major product launch event held by Oppo in China. To summarize, Oppo introduced the Watch X2 with a 47 mm size back in February, following OnePlus’s launch of its own successor to the Watch 2, which is currently priced at $245 on Amazon.

    Design Changes

    In contrast, the Watch X2 Mini features a smaller 43 mm case that includes a slight redesign. According to the promotional images shared by the company, Oppo has removed the quasi-crown guard that was seen on the Watch X2. Instead, the digital crown and a single physical button are positioned prominently away from the compact body, similar to the layout found on many other smartwatches.

    Display and Performance

    The Watch X2 Mini is designed to be mainly operated through its AMOLED display, which spans 1.5 inches with a native resolution of 466 x 466 pixels and can achieve a peak brightness of 1,000 nits. The device is powered by Qualcomm’s Snapdragon W5 Gen 1 chipset, along with a BES2800BP low-power chipset that allows for up to 7 days of battery life thanks to the 354 mAh battery. However, it’s important to note that Oppo’s official estimates indicate a reduction to just 1.5 days of battery when the smartwatch is used intensively.

    Battery Life and Features

    Even so, it appears that the Watch X2 Mini won’t require daily charging. While it lacks ECG functionality, it does include an integrated GPS module and what Oppo claims to be a very accurate heart rate sensor. The starting price for Oppo’s latest smartwatch is CNY 1,799 (~$247) in China, reaching up to CNY 2,099 (~$288) for the more luxurious 18k gold version. Like all of Oppo’s releases today, it remains uncertain if the Watch X2 Mini will see a global launch.

    Source:
    Link


     

  • OnePlus Watch 3 Render and Specs Leak: ECG Monitoring Included

    OnePlus Watch 3 Render and Specs Leak: ECG Monitoring Included

    OnePlus is preparing to unveil the OnePlus 13 and OnePlus 13R smartphones on January 7, along with a fresh color option for the OnePlus Buds 3 Pro. Furthermore, there are indications that the company is working on a new smartwatch. According to a unique report from Smartprix, the OnePlus Watch 3 is expected to be released globally in the first quarter of 2025. This smartwatch aims to offer a more practical and feature-rich experience to enhance its standing in the crowded wearables market.

    Design and Features

    A visual shared with the report indicates that the OnePlus Watch 3 maintains the stylish look of its predecessor while adding a significant new element: a rotary dial. Similar to the Digital Crown found on Apple devices, this feature enhances navigation, particularly in situations where using the touchscreen is not possible, such as when hands are wet. It will also include ECG capabilities, improving the health tracking features of the Watch 3, making it a contender against high-end models like the Samsung Galaxy Watch and Apple Watch. However, health certifications in specific markets may restrict its availability.

    Connectivity and Performance

    Another impressive aspect of the Watch 3 might be its LTE connectivity, which would allow it to function without a smartphone. This means users could make calls, get notifications, and stream music independently. Yet, it’s possible that this feature will be initially limited to select markets, with China likely being the first to receive it.

    The report further mentions that the Watch 3 could be equipped with a robust Qualcomm Snapdragon W5 Gen 1 processor, along with 2GB of RAM and 32GB of storage. Initially, it was said to have a 500mAh battery, but an earlier FCC certification indicated it might have a larger 631mAh battery. Like its predecessor, the device will operate on a dual OS configuration of WearOS and RTOS.

    Size and Launch Expectations

    The previous FCC filing also stated that the OnePlus Watch 3, identified by the model number OPWWE251, will measure 46.6 x 47.6 x 11.75mm, making it a bit bigger than last year’s version. Since it has received FCC certification, we can anticipate a global launch in the near future. More information is likely to surface in the upcoming days, so keep an eye out for updates.

    Source: Link