Tag: MSI GeForce RTX 5090 Lightning Z

  • MSI RTX 5090 Lightning Z Repair: $5,100 GPU Saved After DIY Soldering Mistake

    MSI RTX 5090 Lightning Z Repair: $5,100 GPU Saved After DIY Soldering Mistake

    Key Takeaway

    1. A rare MSI RTX 5090 Lightning Z GPU was damaged due to an amateur soldering attempt, highlighting risks of DIY modifications on high-end hardware.
    2. Expert repair specialists successfully restored the GPU without schematics or donor parts, demonstrating advanced microsoldering skills.
    3. The incident underscores the importance of leaving complex hardware modifications and overclocking to professionals, especially with limited-edition, high-value components.






    Rare MSI RTX 5090 Lightning Z GPU Damaged and Repaired

    Unfortunate Incident Highlights Risks of DIY Overclocking

    Recently, a fortunate yet unlucky event involved a owner of a ultra-rare MSI GeForce RTX 5090 Lightning Z GPU. He decided to test his skills in resistor-modding by tinkering directly on his very expensive graphics card. Sadly, his attempt resulted in damaging a card that’s worth $5,100, with production limited to just 1,300 units worldwide. Despite his good intentions, the damage was too severe, with torn-up thermal pads, missing parts, and traces ripped right from the PCB. This incident demonstrates how trying to do complex repairs at home can sometimes go wrong, especially with such a limited and costly piece of hardware.

    Specialist Intervention Saves a Precious GPU

    Fortunately, a skilled electronics repair shop called NorthridgeFix was called in to help. Their expert technicians took on the complex task of restoring the damaged GPU, and their efforts paid off. Using high-powered microscopes and detailed techniques, the team carefully realigned corrupted traces and replaced missing resistors. The repair was monumental, considering the scarcity of schematics and donor boards for this exclusive model. The whole process needed three separate videos to show everything from initial diagnosis to the final results, highlighting how challenging these repairs are. Eventually, they managed to get the card to POST, showing that even the most damaged cards can sometimes be saved.

    The Owner’s Soldering Skills and Lessons Learned

    The owner’s note revealed he tried to practice soldering tiny 0402 resistors by himself, hoping to modify his GPU. His attempt to add a resistor to unlock MSI’s restricted overclocking BIOS ended up ripping a pad and destroying the GPU’s functionality. The message read, “I wanted to learn how to solder tiny 0402 resistors and was practicing on my GPU. I ended up ripping one of the pads, and now the GPU will not POST. I’d like to repair the pad/trace and realign the resistors.” This situation shows how risky DIY modifications can be, especially on premium hardware, and stresses the importance of leaving complex jobs to experienced technicians.

    Restoration and Future Prospects

    Thanks to the effort of NorthridgeFix, the GPU was able to be revived, passing all basic checks after the repair process. But the card still needs its original cooling shroud for final assembly and stress testing. The restoration illustrates the skill and precision required to recover such a rare piece of hardware, emphasizing that sometimes even the most damaged GPUs just need expert hands. Though the owner still faces the challenge of reassembling fully, his experience underscores that attempting to repair high-end hardware without proper skills can be costly, both in money and valuable components.


    Sources
  • MSI RTX 5090 Lightning Z Cracks Under 2,500W BIOS Test

    MSI RTX 5090 Lightning Z Cracks Under 2,500W BIOS Test

    Key Takeaways

    1. The MSI GeForce RTX 5090 Lightning Z is priced at $5,090, targeting serious collectors and extreme overclockers rather than average gamers.
    2. Early involvement in development allowed YouTuber Alva Jonathan to test the card with custom cooling and later liquid nitrogen for extreme performance.
    3. The card achieved impressive benchmarks, scoring 43,112 points in 3DMark Port Royal, but faced thermal issues that led to a GPU core crack during testing.
    4. Liquid nitrogen cooling presented challenges, with stable temperatures being crucial; exceeding safe limits caused system crashes.
    5. Despite achieving a world record in Geekbench 5, one GPU failed due to thermal shock, resulting in a significant financial loss, but Jonathan plans to continue testing with additional samples.


    MSI’s GeForce RTX 5090 Lightning Z is not made for the average gamer. Priced at a whopping $5,090, this graphics card is designed for either serious collectors or, more realistically, extreme overclockers aiming for benchmark highs. In the hands of YouTuber Alva Jonathan, it performed as expected until an aggressive BIOS, combined with sudden thermal issues, caused a crack in the GPU core, leading to the demise of one sample during testing.

    Early Involvement in Development

    Jonathan was involved with the RTX 5090 Lightning Z from the beginning. MSI Taiwan reached out to him in August 2025 to assist with the card’s creation, initially sending him two early PCB samples without coolers, later followed by three retail versions. For the first tests, he created a custom cooling solution before switching to liquid nitrogen (LN2) as the testing progressed.

    Unique Features and Initial Testing

    This graphics card is distinct from regular RTX 5090 models, both in terms of cost and design. It is clearly built for high-level overclocking. Some of its key specifications include:

    Jonathan started with what might be seen as a modest overclock for such powerful hardware: 3.25 GHz at 1.05V. Even at this point, the card was consuming over 700W.

    With a power limit of 800W in 3DMark Port Royal, the Lightning Z scored 43,112 points. For comparison, MSI’s RTX 5090 Suprim Liquid had previously reached the 40,000–41,000 range, while a standard RTX 5090 usually scores around 36,000–37,000 points. During this run, the GPU peaked at 772W, with power evenly shared across both 16-pin connectors.

    Transition to Liquid Nitrogen Cooling

    To push performance even further, Jonathan collaborated with ARX (arxidmedia) and moved to LN2 cooling. Even with liquid nitrogen, maintaining a stable temperature for the GPU was a challenge. The heatsink in contact with the core was at -40°C, but the GPU itself warmed up, reaching as high as 9°C under load. At 1.12V and 3.42 GHz, power usage soared past 1,000W.

    When using LN2, the safe operating temperature range appeared to be quite limited — around 0°C to 15°C. In one instance, temperatures hit 21°C, leading to an immediate system crash.

    Benchmark Success and Record-Breaking Performance

    Some benchmarks were easier to manage. In GPUPI, Jonathan briefly achieved 3.6 GHz at nearly 0°C. Ultimately, the team settled on 3.5 GHz as a stable operating frequency and set a new HWBot world record for GPU compute performance in Geekbench 5, achieving a score of 683,433, which still stands today.

    The critical moment occurred when they switched to the 2,500W XOC BIOS. Previously, they were using an older version thought to apply excessive voltage too quickly.

    At just 1.2V — which is manageable under LN2 but risky in ambient temperatures around 25°C — one GPU experienced catastrophic failure. The core visibly cracked, likely due to thermal shock, as one section of the die remained very cold while another heated up, creating an imbalance that the silicon couldn’t tolerate.

    Financial Impact and Future Plans

    In an instant, around $5,000 was lost. The other components on the board are still intact, so there is a possibility that the card could be revived with a replacement core.

    Although Jonathan achieved the Geekbench 5 world record, he was unable to meet other goals, including breaking the 3DMark Solar Bay Extreme record. He still possesses four additional samples for ongoing testing and intends to enhance the cooler mounting. He also hinted at the possibility of reverting to a more stable retail BIOS for future attempts.

  • MSI GeForce RTX 5090 Lightning Z: Powerful 2.5 kW Gaming GPU

    MSI GeForce RTX 5090 Lightning Z: Powerful 2.5 kW Gaming GPU

    Key Takeaways

    1. MSI is reviving the Lightning Z brand with the GeForce RTX 5090 Lightning Z GPU, producing only 1,300 units.
    2. The GPU features a built-in AIO cooling system with a 300 mm radiator and an 8-inch customizable display.
    3. It requires two 12v 2×6 connectors and has a power consumption limit of up to 1,600 watts.
    4. A BIOS option allows a power limit of 2,500 watts for maximum overclocking, with potential overclocking reaching 3.74 GHz using liquid nitrogen.
    5. The MSI GeForce RTX 5090 Lightning Z is set to launch next month.


    Around seven years have gone by, and MSI has decided it’s time to resurrect the Lightning Z brand. The GeForce RTX 5090 Lightning Z gaming GPU is nothing short of extraordinary and is sure to carry a price that matches its wild specs, especially since MSI intends to produce only 1,300 pieces.

    Impressive Features

    This colossal GPU comes equipped with a built-in AIO cooling system, which includes a 300 mm radiator and a striking 8-inch display on top. Users can personalize this display to show anything they want. As expected, the card uses two of the notorious 12v 2×6 connectors, allowing for power consumption of up to 1,600 watts. There have been significant power connector issues with the standard 600-watt RTX 5090 (Aorus Master ICE currently priced at $3,949 on Amazon), which may raise some concerns about the reliability of the Lightning Z.

    Overclocking Potential

    To add to its impressive capabilities, the MSI GeForce RTX 5090 Lightning Z will offer a BIOS option that allows for an outrageous 2,500 W power limit, enabling maximum overclocking. It’s no surprise that overclockers are already pushing this card to a staggering 3.74 GHz, with some help from liquid nitrogen, of course. Here are some more details and specs regarding the MSI RTX 5090 Lightning Z:

    The MSI GeForce RTX 5090 Lightning Z is set to launch next month, and as previously stated, only 1,300 units will be produced.

    Source:
    Link