Tag: GaN Technology

  • Cuktech Launches 100W GaN Laptop Charger with Display

    Cuktech Launches 100W GaN Laptop Charger with Display

    Key Takeaways

    1. The Cuktech 10 Ultra charger features four USB ports (three USB-C and one USB-A) with a maximum output of 100 watts.
    2. It includes a 1.57-inch smart display with touch controls for real-time charging information and settings access.
    3. The charger uses GaN technology for enhanced efficiency and thermal performance, along with smart dynamic power allocation.
    4. It has a comprehensive 8-layer safety protection system to guard against overvoltage, short circuits, and other hazards.
    5. The charger is compatible with various devices and is priced at $56.99, including a free 240 W USB-C cable.


    Earlier this month, Cuktech introduced the 6 Ultra, a charger that outputs 100 watts and has three ports. Now, the company has officially launched its new 10 Ultra wall charger designed for laptops, tablets, smartphones, and earbuds. This latest charger features a total of four USB ports, but the power output remains the same as its predecessor.

    Smart Display Features

    The Cuktech 10 Ultra comes equipped with a built-in 1.57-inch smart display that has touch controls, allowing users to access extra settings and get charging information, including temperature, wattage in real time, voltage, and current. The display boasts a peak brightness of up to 700 nits and offers a broad 160° viewing angle.

    Power Distribution

    When it comes to power, the 10 Ultra charger delivers a maximum output of 100 watts across its four USB ports, which include three USB-C and one USB-A. In terms of power distribution, the charger can provide up to 100 W (USB-C1/C2), 45 W (USB-C3), and 18 W (USB-A) when using a single port. If all ports are utilized simultaneously, the output changes to 45 W, 45 W, 10 W, and 10 W, respectively.

    Enhanced Efficiency

    This charging accessory utilizes GaN technology, which enhances efficiency and improves thermal performance. Additionally, it features smart dynamic power allocation to ensure optimal power distribution among all connected devices. Another important aspect of the Cuktech 10 Ultra is its temperature monitoring system, which can conduct up to 36,000 checks every hour, according to the brand.

    Furthermore, Cuktech has integrated an 8-layer safety protection system into the charger to protect against overvoltage, short circuits, and other electrical hazards. It is compatible with a wide range of devices, including MacBooks, iPhone 17/16 series, Galaxy S26 series, Pixel, and more.

    You can now buy the Cuktech 10 Ultra 100 W wall charger directly from Amazon for $56.99. Additionally, the company is providing a 240 W USB-C cable for free in the box.

  • Anker Reveals Details on New 250W Prime Desktop Charger

    Anker Reveals Details on New 250W Prime Desktop Charger

    Key Takeaways

    1. The Anker Prime 250W Smart Desktop Charger Pro+ features six ports, with power outputs of up to 140W USB-C, three at 100W USB-C, and two at 22.5W USB-A.
    2. It supports various fast charging protocols, including 140W PD3.1, 100W PPS, 120W Max Xiaomi HyperCharge, and 66W Max Huawei SuperCharge.
    3. The charger has smart charging capabilities, automatically adjusting output based on the connected device.
    4. It includes a 2.26-inch LCD for displaying charging data and features a mobile app for remote management.
    5. The official launch date is March 9, 2026, in China, with uncertain availability in North America or Europe.


    More information about the Anker Prime 250W Smart Desktop Charger Pro+ has been unveiled. This device was seen in China in early March 2026, and it is expected to officially launch in this region on March 9th.

    Specifications and Features

    We have previously known that the Anker 250W Smart Desktop Charger Pro+ comes with six ports, similar to the previous Anker Prime Charger (250W, 6 Ports, GaNPrime) priced at $99.98 on Amazon. The details regarding the outputs have now been disclosed. Each output can provide the same maximum power as the original version, with one reaching up to 140W USB-C, three supporting up to 100W USB-C, and two offering up to 22.5W USB-A. However, this latest model is compatible with a broader variety of fast charging protocols. These include 140W PD3.1, 100W PPS, 120W Max Xiaomi HyperCharge, and 66W Max Huawei SuperCharge.

    Smart Charging Capabilities

    This new Anker product, also known as the Prime 250W GaN Desktop Charger, is designed to intelligently recognize the device it’s connected to and modify the output as needed. The integrated 2.26-inch LCD displays charging data and includes a Clock Mode. Additionally, users can manage the device remotely, checking the charging status and switching between modes using the brand’s mobile application. The dimensions of this product are 106 x 90 x 40 mm (~4.17 x 3.54 x 1.57 inches), and it has a weight of 640 g (~22.6 oz).

    Market Availability

    It is still unclear if or when the Anker Prime 250W Smart Desktop Charger Pro+ will be available in other regions such as North America or Europe.

    Source:
    Link


     

  • Anker 45W Compact Charger with Smart Display Now in the US

    Anker 45W Compact Charger with Smart Display Now in the US

    Key Takeaways

    1. The Anker Nano Charger (45W, Smart Display, 180° foldable) has launched in the US, following its earlier release in China.
    2. It offers compact dimensions (34.0 x 35.5 x 40.0 mm) and weighs only 75 g, thanks to GaN technology.
    3. The charger supports quick charging protocols like PD 3.0 and PPS, with a maximum output of 45W through a single USB-C port.
    4. The foldable design allows users to adjust the pins to 90° or 180°, providing flexibility in viewing the charging status.
    5. It is priced at $39.99, with an introductory offer of $29.99, but availability in other regions like Europe is uncertain.


    Another Anker charging gadget, the Nano Charger (45W, Smart Display, 180° foldable), has just been launched in the US. A similar version hit the shelves in China back in September 2025, known there as the Nano Safe Charge Smart Charger (45W Max) (translated by machines).

    Compact Design and Features

    Anker’s new Nano Charger is a smaller alternative to its previous 100W and 160W Smart Display devices (Anker Prime Charger (160W, 3 Ports, Smart Display) currently priced at $105.99 on Amazon). As the name indicates, this model can charge up to 45W through its single USB-C port. It supports quick charging protocols like PD 3.0 and PPS. Additionally, Care Mode helps prevent overheating, which is handy if you’re charging devices overnight.

    Dimensions and Versatility

    Thanks to GaN technology, the Nano Charger is compact, with dimensions of 34.0 x 35.5 x 40.0 mm (about 1.34 x 1.40 x 1.57 inches) and a weight of 75 g (around 2.65 oz). One unique aspect of this product is its foldable design, allowing users to adjust the pins to either a 90° or 180° angle. This feature lets you select the best viewing angle for the screen, so you can monitor the charging status whenever you need.

    Availability and Pricing

    The Anker Nano Charger (45W, Smart Display, 180° foldable) is now for sale on the brand’s online store in the US. It retails for $39.99, but there’s currently an introductory price of $29.99. It’s still unclear if or when it will be available in other areas like Europe.

    Source:
    Link


     

  • Xiaomi 65W Power Dock Expands Availability to More Countries

    Xiaomi 65W Power Dock Expands Availability to More Countries

    Key Takeaways

    1. The Xiaomi 65W Power Dock is a 7-in-1 charging solution with three AC outputs and two USB-C ports.
    2. It supports Xiaomi’s 65W HyperCharge technology, allowing fast charging for devices like the Xiaomi 14 and MacBook Air.
    3. The device includes two 22.5W USB-A ports and can handle a maximum load of 1,650W.
    4. It features an overload protection button and is designed to be compact and sleek.
    5. Currently available in Taiwan for NT$799 (about $28), with no confirmed global release date or pricing yet.


    The Xiaomi 65W Power Dock has been listed on the company’s global website. This charging device is currently on sale in Taiwan, where it is referred to as the Xiaomi 65W GaN extension cable. There are expectations it will soon be available in other parts of the world.

    A Versatile Charging Solution

    Xiaomi brands the 65W Power Dock as a 7-in-1 charging solution. It comes equipped with three AC outputs. The Taiwanese version includes two three-pin Type B sockets and one two-pin socket. Additionally, there are two USB-C ports that support Xiaomi’s 65W HyperCharge technology. Xiaomi claims that this allows users to charge a Xiaomi 14 to 50% in just 18 minutes, and a MacBook Air 13 M1 to 50% in 43 minutes. The device also supports fast charging protocols like PD3.0, QC3.0, and FCP. Furthermore, it utilizes Gallium Nitride (GaN) tech for speedy and efficient charging.

    Additional Charging Ports

    Moreover, the Power Dock includes two 22.5W USB-A ports that are suitable for charging devices such as an iPhone or a smartwatch. When all four ports are used, the first USB-C port provides 45W, while the other three share a total of 15W. The device features an overload protection button, and it can handle a maximum load of 1,650W. The 65W Power Dock is designed to be compact, with dimensions of 120.0 x 46.5 x 44.0 mm (about 4.7 x 1.8 x 1.7 inches), and boasts a sleek white aesthetic.

    Pricing and Availability

    As of now, Xiaomi has not revealed when the 65W Power Dock will be available in other regions or the pricing details. In Taiwan, the Xiaomi 65W GaN extension cable is priced at NT$799, which is approximately $28.

    Source:
    Link


     

  • MIT Reveals 3D Chip Tech to Boost Smartphone Performance

    MIT Reveals 3D Chip Tech to Boost Smartphone Performance

    Key Takeaways

    1. Gallium nitride (GaN) is a superior semiconductor compared to silicon in speed and efficiency but has been expensive to use in electronics.
    2. A new methodology allows GaN transistors to be placed directly on silicon wafers, reducing costs and enhancing performance.
    3. The innovative design involves slicing GaN transistors into small dielets with copper pillars for better bonding and conductivity.
    4. The new technique has successfully created a power amplifier with greater signal strength and lower power consumption, indicating potential for 5G/6G and IoT applications.
    5. If commercialized, this technology could improve smartphone performance and support advanced on-device AI models.


    For many years, the electronics sector has been trying to incorporate gallium nitride (GaN) into complex circuits. GaN stands out as a semiconductor that surpasses silicon in speed and efficiency, however, its pricey nature has restricted its widespread use. Traditional techniques that attach complete GaN wafers to silicon are costly, which limits its adoption.

    New Methodology

    A fresh approach has been developed that does away with the need for a GaN wafer with silicon, instead utilizing GaN transistors placed on silicon wafers. This new method has successfully lowered costs while enhancing both speed and efficiency. The innovation came from researchers at MIT in collaboration with industry partners.

    Innovative Transistor Design

    The research team achieved this by slicing individual GaN transistors, known as dielets, which are sized at 240 by 410 microns. Each of these transistors is designed with small copper pillars on top, allowing them to bond directly to the copper pillars on a standard silicon CMOS chip’s surface. This low-temperature copper-to-copper bonding technique is not only cheaper but also offers better conductivity and is more aligned with standard semiconductor foundries when compared to older methods that relied on gold for bonding.

    Future Prospects

    Using this technique, the team managed to create a power amplifier that provides greater signal strength than current silicon-only chips found in smartphones, all while consuming less power. This indicates a bright future for applications in 5G/6G and IoT devices. Moreover, these chips hold potential for quantum computing, since GaN performs well at low temperatures.

    Should this technology reach commercialization, it could significantly enhance the performance of smartphones and other consumer gadgets, delivering the required power for more sophisticated on-device AI models. For now, the Samsung Galaxy S25 Ultra (curr. $1,219 on Amazon) is among the leading smartphones featuring advanced on-device AI capabilities.

    Source:
    Link

  • Anker 130W Nano Charger with 6 Ports Launches in Europe for €59.99

    Anker 130W Nano Charger with 6 Ports Launches in Europe for €59.99

    Key Takeaways

    1. Multi-Port Design: The Anker Nano Charger 130W features 6 ports, including 4 USB-C and 2 USB-A, allowing multiple devices to charge simultaneously.

    2. Compact Size: With a slim profile of just 19 mm and weighing 320 grams, it is portable and easy to carry.

    3. Fast Charging Capabilities: It can charge two 15-inch MacBook Airs to 50% in 30 minutes and a 14-inch MacBook Pro from 0% to 50% in 27 minutes.

    4. Advanced Technology: The charger supports PPS, Anker’s Power IQ 3.0, and ActiveShield 2.0 for efficient and safe charging.

    5. Availability and Price: The charger is priced at €59.99 and is currently available on Anker’s website and Amazon, with North American availability expected soon.


    Along with the Anker Nano Charger (35W) that comes with a retractable USB-C cable, Anker has introduced a new multi-port charger for those who often need to charge varios devices at once. The Anker Nano Charger 130W is a desktop GaN charger featuring 6 ports and a total output of 130W, which lets it charge several devices at the same time, including two MacBook Airs.

    Design and Features

    This Anker Nano Charger (130W, 6 Ports) is offered in both black and white. It has four USB-C ports along with two USB-A ports. With a slim profile of just 19 mm, it fits conveniently in bags. The charger includes a gentle AC plug and comes with a storage bag to safeguard it from scratches.

    Charging Capabilities

    Even though the total output of the charger is 130W, no individual port can deliver that amount. Anker claims that it can charge two 15-inch MacBook Airs to 50% in just 30 minutes, or bring a 14-inch MacBook Pro from 0% to 50% in 27 minutes. Below are the maximum power outputs for all six ports:

    The Anker Nano Charger weighs a little bit at 320 grams, but it’s not overly heavy for a desktop charger with six ports. It also supports PPS, Anker’s Power IQ 3.0 tech, and ActiveShield 2.0, which monitors temperatures during the charging process.

    Availability and Pricing

    The Anker Nano Charger (130W, 6-ports) can be purchased today for €59.99 on Anker’s official website as well as on Amazon. This charger was first launched in China last month and is also anticipated to arrive in North America shortly.

    Source:
    Link


     

  • Baseus PicoGo 45W Fast Charger Launches to Compete with Anker Nano II

    Baseus PicoGo 45W Fast Charger Launches to Compete with Anker Nano II

    The Baseus PicoGo 45W charger has officially launched and is competing directly with the Anker Nano II. However, there are certain features that make the Anker option more appealing. One notable advantage is that the Nano II includes a foldable plug, which enhances its portability.

    Compact Design but Lacking Foldability

    While the PicoGo 45W power adapter boasts a compact design, it does not feature a foldable plug. In addition, the Anker Nano II has a price edge; it typically retails for $23.99 (currently $19.99 on Amazon), while Baseus’s new product is priced at $25.99.

    Advanced Technology in Charging

    Despite this, the PicoGo 45W presents some advantages of its own. It incorporates GaN 6 technology, whereas the Nano II uses GaN 2. Baseus claims that this latest technology improves efficiency, achieving an energy conversion rate of 93%.

    Versatile Charging Standards

    Another key feature of the Baseus PicoGo 45W charger is its compatibility with multiple charging standards, including PD 3.0, QC 3.0, PPS, FCP, AFC, and SCP. Although Anker provides limited details on the protocols supported by the Nano II, it does confirm compatibility with PPS.

    Safety Features and Cooling System

    Baseus also emphasizes the safety features of the PicoGo 45W fast charger. The company states that the adapter monitors the charging status 720,000 times every hour, ensuring safe and stable charging experiences. Additionally, it includes a dual heat dissipation cooling system to manage temperature effectively.


    Image 1
    Image 1
  • Lenovo Introduces Two New ThinkPlus GaN Chargers Up to 140W

    Lenovo Introduces Two New ThinkPlus GaN Chargers Up to 140W

    Lenovo has introduced two new additions to its ThinkPlus charging lineup, targeting the Chinese market. These chargers, part of the "Light and Shadow" series, are engineered to charge multiple devices at once.

    The initial model features a four-port configuration with two USB-C and two USB-A ports. With a maximum output of 100W, Lenovo claims it can fully charge a ThinkBook 14 G6 laptop in under an hour and fifteen minutes.

    Versatile Charging Capabilities

    Although primarily designed for laptops, the charger’s compatibility with various charging protocols allows it to power a wide array of devices, including smartphones, gaming handhelds, and other accessories.

    The second charger comes with a three-port setup, including two USB-C and one USB-A port. This model delivers a more substantial output, maxing out at 140W. According to Lenovo, it can charge an Apple MacBook Pro 14 in about 74 minutes. Like its 100W counterpart, this charger supports multiple charging standards, making it suitable for a diverse range of devices.

    Advanced Technology and Safety Features

    Both chargers utilize GaN technology, contributing to their compact and portable design. The inclusion of folding prongs further enhances their suitability for travel. Lenovo has also incorporated multiple safety features to protect devices during charging.

    The four-port 100W charger is priced at CNY 249, while the three-port 140W model is available for CNY 369. Currently, these chargers are exclusive to the Chinese market, with no confirmed plans for global release. For those looking for similar options, the UGREEN Nexode 140W power adapter is a potential alternative.

    Lenovo has yet to announce a specific timeline for the possible international availability of these ThinkPlus chargers.


    Lenovo Introduces Two New ThinkPlus GaN Chargers Up to 140W
  • Baseus Introduces Lingao Mini Multi-Color Charger

    Baseus Introduces Lingao Mini Multi-Color Charger

    Baseus recently unveiled an updated model of its Lingao Mini charger in China, sporting an eye-catching multi-color design and detachable AC port module. This innovative charger caters to users seeking an effective yet flexible charging solution for multiple devices at an attractive initial price point of 199 yuan (roughly $28); now available to buy via JD.com. Let’s examine its primary specs more in-depth.

    Baseus 67W Lingao Mini Specifications:

    The Lingao Mini utilizes GaN (Gallium Nitride) technology, known for delivering high power output while remaining compact – creating a smaller charger without compromising performance.

    Detachable Design And Port Configuration:

    This charger features a detachable design with separate modules: AC port module with 1.5m extension cord for flexible placement; and USB port module equipped with three USB-C and one USB-A ports, capable of simultaneously charging four devices.

    Efficient Charging And Safety Features:

    Each USB-C port supports rapid charging up to 67W while USB-A ports offer standard 5W charging speeds. When multiple ports are utilized simultaneously, their combined output cannot exceed 65W or 60W ensuring effective charging across devices.

    This charger prioritizes safety with built-in protections that detect overload, overcurrent, overvoltage, undervoltage and any potential faults in real time. In case of issues, its real-time monitoring circuits automatically interrupt power to protect devices if an issue arises – while its touch switch design prevents sparks during device connection process while its intelligent light display gives users real time feedback of charging status.

    Color Options and Versatility of Compatibility:

    Lingao Mini chargers come in Black, White, Blue and Purple varieties and offer 2500W load capacity – suitable for charging laptops, smartphones, tablets and appliances such as electric kettles or refrigerators. Furthermore, child protection safety doors prevent accidental plug insertion by children.


  • Xiaomi unveils 120W GaN USB-C charger kit at $28

    Xiaomi unveils 120W GaN USB-C charger kit at $28

    Xiaomi recently unveiled an innovative 120W USB-C Gallium Nitride (GaN) charger kit known as the "Little Pudding," emphasizing its compact size and rapid charging abilities. Now available exclusively on JD.com at an initial price point of 199 Yuan (approximately $28).

    Xiaomi 120W GaN Charger Features:

    Xiaomi claims the "Little Pudding" charger lives up to its name by boasting an attractive white, compact form factor – 42% smaller than traditional 120W GaN chargers! Xiaomi achieved this reduction through using GaN material which provides efficient thermal conductivity, resistance against high temperatures and small form factor; yet this small charger still boasts up to 120W fast charging for compatible Xiaomi smartphones!

    Wide Compatibility and Safety Measures:

    Xiaomi’s Little Pudding charger goes beyond smartphones alone in terms of compatibility; its wide compatibility with PD 3.0, QC 3.0 and UFCS 1.0 protocols allows it to intelligently identify and charge various devices such as tablets, laptops and wearables as well. Furthermore, up to 65W fast laptop charging power can be delivered continuously by this charger! Furthermore, safety is top of mind with Xiaomi, so numerous safeguards such as fire-retardant housing materials with intelligent temperature controls as well as protection mechanisms against overvoltage/overcurrent/overheating/short circuiting etc are built-in for added peace-of mind when charging.

    Dimensions and Accessories:

    Measuring 34mm by 34mm x 53mm, this charger operates within an ideal temperature range from -10degC to 40degC and includes a 1.5m USB-C to USB-C data cable that supports 120W fast charging for added flexibility during different charging scenarios without concern about short cables.