Key Takeaways
1. Power Capacity: The Carbo 10000 Gen 2 has a total capacity of 38.8 watt-hours, with 35 watt-hours available for powering devices, translating to 10,000 mAh at 3.88 volts or 7,000 mAh at 5V.
2. Enhanced Efficiency: The power bank features a revamped 9-volt internal platform and advanced battery management, resulting in improved efficiency and a sturdy design that meets IPX8 waterproof standards.
3. Increased Power Output: It offers up to 30 watts of output power through the USB-C port, an upgrade from the previous model’s 20 watts, and supports multiple voltages including 5V, 9V, 12V, 15V, and 10V under certain conditions.
4. Weight and Design: Weighing 170 grams, it is lightweight but not the lightest option from Nitecore, with the previous models weighing 155 grams and 158 grams.
5. Pricing and Availability: The price is not disclosed, but it is expected to be around $100 based on the previous model, and it does not carry a CCC logo, restricting its use in China.
Nitecore has launched a new power bank called the Carbo 10000 Gen 2. This device offers a total of 38.8 watt-hours, out of which 35 watt-hours are intended for powering various gadgets. In terms of milliampere-hours, it translates to 10,000 mAh at 3.88 volts or 7,000 mAh at 5V (3A, 35 Wh), which is the voltage needed for the USB-C connection.
Enhanced Efficiency
The improved efficiency of the Carbo 10000 Gen 2 is thanks to a revamped 9-volt internal platform and an advanced battery management system, claims Nitecore. Additionally, it boasts a sturdy design that meets the IPX8 standard, allowing it to be submerged in water up to 2 meters. At a weight of 170 grams, it is fairly lightweight, though it’s not the lightest option available from Nitecore. The older NB Plus model weighs in at 155 grams, while its earlier version weighs 158 grams.
Increased Power Output
Housed in a carbon fiber composite shell, this new generation of power bank provides up to 30 watts of output power via the USB-C port, an upgrade from the previous 20 watts. The Carbo 10000 Gen 2 is compatible with multiple voltages including 5 volts, as well as 9, 12, and 15 volts. Interestingly, it also explicitly lists 10 volts as an option. It’s worth noting that these other voltage levels are accessible only when one of the two USB-C ports is utilized. If both ports are active, the power bank switches from USB Power Delivery to USB-C and can then only supply 3A at 5V across both ports.
Pricing and Availability
As is typical for Nitecore, a price has not been disclosed. However, since the previous model retailed for around $100, it’s reasonable to assume that the Carbo 10000 Gen 2 will be on the pricier side. Lastly, it’s important to note that the power bank does not carry a CCC logo, which means it should not be taken to China.
Source:
Link
Leave a Reply