Key Takeaways
- The Raspberry Pi AI HAT+ 2 enhances the AI computing capability of the Raspberry Pi 5 by up to 40 TOPS (INT4) using an NPU for data analysis.
- Installation of the expansion board is simple and follows the familiar HAT concept, connecting via screws, GPIO header, and PCIe link.
- Compatibility is limited to newer Raspberry Pi models due to the lack of PCIe interface in older versions.
- The expansion board is user-friendly, automatically detected by Raspberry Pi OS for easy AI application use.
- The Raspberry Pi AI HAT+ 2 is available at specialized stores, priced around $130.
Single-board computers gain a lot from using an NPU, as it allows for data analysis through neural networks. This can be helpful in recognizing patterns within data or images. The Raspberry Pi AI HAT+ 2 is a recent expansion board designed to enhance the AI computing capability of the Raspberry Pi 5 by as much as 40 TOPS (INT4). It features a well-established NPU, the Hailo-10H, equipped with 8GB of onboard memory. Consequently, running AI models should ideally have minimal or no effect on the overall performance of the single-board computer.
Easy Installation
Installing this expansion board is quite simple and adheres to the familiar HAT concept. Users can attach the board to the Raspberry Pi 5 (the 8GB version starts at $105 on Amazon) using screws, then connect it via the GPIO header and a PCIe link. Unfortunately, older models of the Raspberry Pi lack a PCIe interface, restricting compatibility to the newer single-board computers.
User-Friendly Features
The Raspberry Pi 5 expansion board is designed to be user-friendly, which is something one would expect from an official accessory. More specifically, the Raspberry Pi AI HAT+ 2 is automatically detected by the Raspberry Pi OS, allowing users to run AI applications with ease. This new board is already available at select specialized stores and is priced at around $130.
Raspberry Pi Foundation
Source: Link