Tag: RG34XX SP

  • Anbernic RG35XX Pro: Specs for New Pocket Gaming Handheld

    Anbernic RG35XX Pro: Specs for New Pocket Gaming Handheld

    Key Takeaways

    1. Anbernic launched the RG34XX SP and RG35XX Pro recently, with the RG34XX SP priced at $78.99 on Amazon.
    2. The RG35XX Pro features the Allwinner H700 chipset and a 3.5-inch IPS display with a resolution of 640 x 480 pixels.
    3. The RG35XX Pro has 1 GB of LPDDR4 RAM, which is less than the RG34XX SP.
    4. The battery capacity of the RG35XX Pro is 3,200 mAh, reduced by 100 mAh compared to the RG35XX Plus.
    5. The RG35XX Pro introduces new joysticks but dimensions are not yet disclosed, expected to be similar to the BatleXP G350.


    Anbernic has been quite active this month, even by its usual busy standards. Just under two weeks ago, the company launched the RG34XX SP as a smaller option compared to the RG35XX SP, which is currently priced at $78.99 on Amazon. Shortly after, they introduced the RG35XX Pro and then shifted focus to the RG Slide in a teaser released earlier.

    Specifications Unveiled

    Now, Anbernic has disclosed all the important specifications for the RG35XX Pro before its anticipated release within the next week or two. The RG35XX Pro essentially brings back the RG35XX Plus with some modifications. For example, Anbernic has included the Allwinner H700 chipset along with a 3.5-inch IPS display that provides a resolution of 640 x 480 pixels. Sadly, the company has retained only 1 GB of LPDDR4 RAM, which leaves the RG35XX Pro at a disadvantage when compared to the RG34XX SP.

    Battery and Features

    In addition, the battery capacity has decreased by 100 mAh, now at 3,200 mAh when comparing the RG35XX Plus to the RG35XX Pro. Nevertheless, Anbernic sets the RG35XX Pro apart from the RG35XX Plus by incorporating a new set of joysticks. Interestingly, they have not yet disclosed the dimensions of the device. It is expected that the RG35XX Pro will be similar in size to the BatleXP G350, which measures 128 x 81 x 22 mm. For additional details, check out Anbernic’s video below.

    Source:
    Link

  • Anbernic RG35XX Pro: Exciting New Retro Gaming Handheld Release

    Anbernic RG35XX Pro: Exciting New Retro Gaming Handheld Release

    Key Takeaways

    1. Anbernic has introduced two new gaming handhelds, the RG34XX SP and RG557, in quick succession.
    2. The company is returning to its RG35XX series with the upcoming RG35XX Pro, after a break since the RG35XX SP refresh in September.
    3. The RG35XX Pro is expected to support emulation for fifth-generation home consoles and seventh-generation handhelds, likely using an Allwinner H700 chipset.
    4. The design of the RG35XX Pro is similar to the BattleXP G350, featuring a dual joystick configuration.
    5. Full specifications and pricing for the RG35XX Pro are anticipated to be announced soon, either later this week or in early June.


    Anbernic is moving fast with another gaming handheld, having recently introduced the RG34XX SP and the RG557 in less than a month from each other. Contrary to what some may have thought, Anbernic isn’t venturing into a new design for its next device. Instead, the company is going back to the RG35XX series after a break, with the last update being the RG35XX SP refresh back in September, which is currently priced at $78.98 on Amazon.

    New Developments in the RG35XX Series

    This time around, the company is working on the RG35XX Pro, which we believe will be part of its product launch in June, marking the final release before summer. True to form, Anbernic has primarily highlighted the new handheld’s emulation features first, which seem to support up to fifth-generation home consoles and seventh-generation handhelds, including the PlayStation Portable. This suggests that Anbernic may have once again used an Allwinner H700 chipset. Though this isn’t confirmed yet, we think it might be combined with 2 GB of RAM, similar to the RG34XX SP, to set the RG35XX Pro apart from other RG35XX models.

    Design Similarities and Expectations

    In essence, the RG35XX Pro closely resembles the BattleXP G350 that was released earlier this year due to its design and dual joystick configuration. Therefore, the RG35XX SP can be seen as a kind of spiritual successor to the RG353V, but with a more advanced chipset. While Anbernic hasn’t officially announced pricing or the full specs yet, we expect the company to provide that information either later this week or at the start of June.

    Source:
    Link

  • Anbernic RG34XX Review: Affordable Game Boy Advance SP Alternative

    Anbernic RG34XX Review: Affordable Game Boy Advance SP Alternative

    Key Takeaways

    1. Anbernic has launched the RG34XX SP retro gaming handheld, following the RG557 release and incorporating features from the RG35XX SP and RG34XX.
    2. Caution is advised while charging the RG34XX SP, with a recommendation to use the provided USB Type-A to Type-C cable due to known issues with the RG35XX SP; battery life is around 6 hours.
    3. The RG34XX SP measures 83 x 82 x 25 mm and weighs 178 g, making it smaller and lighter than the RG35XX SP.
    4. Early reviews have praised the RG34XX SP for its display, design, and hinge mechanism.
    5. The RG34XX SP is priced at $59.99 for global orders until May 21, after which it will increase to $66.99, with options for 128 GB and 256 GB microSD cards available.


    Anbernic has launched a new retro gaming handheld after a quiet start this year. Following the RG556’s return with the RG557 last month, the company has now shifted focus to a device that incorporates features from both the RG35XX SP and the RG34XX, which was introduced in December (currently priced at $84.98 on Amazon). In brief, Anbernic has disclosed that the RG34XX SP comes equipped with the following hardware:

    Caution with Charging

    It’s important to be careful while charging the RG34XX SP, just like with the RG35XX SP. Currently, we suggest using a USB Type-A to Type-C cable, preferably the one provided by Anbernic, due to the well-known charging problems linked to the RG35XX SP. Interestingly, Anbernic has mentioned that the RG34XX SP is expected to last around 6 hours on a single charge, which is two hours less than the RG35XX SP, even though they share the same chipset and battery capacity.

    Dimensions and Weight

    Anbernic has also confirmed the dimensions of its newest handheld, which measures 83 x 82 x 25 mm and weighs 178 g. In comparison, the RG35XX SP is larger at 89 x 85 x 27 mm and weighs 192 g. Regardless of these differences, the RG34XX SP has received positive feedback in early reviews. Adin Walls and TechDweeb have complimented its display, design, and hinge mechanism, among other features.

    Pricing and Availability

    The Anbernic RG34XX SP is available for global orders starting at $59.99 until May 21. After this date, the price is expected to increase to $66.99. As of the publication date, Anbernic has stock in all four color choices, along with optional 128 GB and 256 GB microSD cards. For further details, check out the company’s website.

    Source:
    Link

  • Anbernic Gaming Handheld Rumored to Have Xperia Play Features

    Anbernic Gaming Handheld Rumored to Have Xperia Play Features

    Key Takeaways

    1. Anbernic will launch the RG34XX SP soon, following the RG557, which is priced at $339.99 on Amazon.
    2. The company plans to release more than a dozen gaming handhelds this year, showing strong commitment to the market.
    3. A prototype for a new unnamed handheld has leaked, featuring a sliding mechanism to conceal controls.
    4. The unnamed device may include a 5-inch display and a MediaTek Dimensity 8300 chipset, similar to the RG557.
    5. It is uncertain if the unnamed prototype will go into mass production, but there is interest in the concept.


    Anbernic is set to introduce the RG34XX SP later this week, following the recent launch of the RG557 (currently priced at $339.99 on Amazon). While many of its competitors might take a break after releasing two new devices in quick succession, Anbernic appears determined to roll out more than a dozen gaming handhelds this year.

    New Prototype Surfaces

    An image of a prototype for the RG34XX SP leaked yesterday, and now rumors have emerged about a completely new handheld. This device, which is still unnamed, features a sliding mechanism that conceals its controls when they are not in use. In a way, this design recalls the Xperia Play while also incorporating a control layout similar to that of the MCon.

    Production Plans Uncertain

    At this moment, it’s not clear if Anbernic intends to mass-produce this design. However, sources like Retro Handhelds suggest that the concept is under consideration. The prototype is believed to include a 5-inch display and a MediaTek Dimensity 8300 chipset, which Anbernic has already utilized in the RG557. Therefore, it is likely that this unnamed device will be priced higher within Anbernic’s lineup compared to the upcoming RG34XX SP.

    Source:
    Link


     

  • Anbernic RG34XX SP Design Leak: GBA SP Inspired Lookalike

    Anbernic RG34XX SP Design Leak: GBA SP Inspired Lookalike

    Key Takeaways

    1. Anbernic is launching the RG34XX SP handheld gaming device soon, following the RG557 release.
    2. The RG34XX SP’s design is compared to the Miyoo Flip or Flip V2 instead of the RG35XX SP.
    3. The device will use the Allwinner H700 chipset, not the anticipated new chipset between RK3566 and T618.
    4. The RG34XX SP is expected to deliver a gaming experience similar to the RG35XX SP with 2 GB of RAM.
    5. Initial plans for a joystick-less design for the RG34XX SP seem to have been abandoned, leading to thicker bezels in the retail version.


    Anbernic is set to begin selling its RG34XX SP later this week. This new clamshell gaming handheld comes less than a month after the RG557. Its design is often compared to the Miyoo Flip or Flip V2, rather than the RG35XX SP, which is currently priced at $76.99 on Amazon.

    Chipset Expectations

    There were early indications that the RG34XX SP would be the first device to feature a new chipset from Anbernic, intended to perform between the Rockchip RK3566 and Unisoc Tiger T618. However, those expectations didn’t materialize, as Anbernic opted to stick with the Allwinner H700 chipset once again.

    Gaming Experience

    With the Allwinner H700 chipset and 2 GB of RAM, the RG34XX SP is expected to provide a gaming experience similar to that of the RG35XX SP. It appears that Anbernic may have had plans to create the RG34XX SP with a design more akin to the RG35XX SP initially.

    If the design leak shown below is correct, Anbernic was thinking of releasing the RG34XX SP without joysticks. This design would likely have made the device shorter, which could also explain the unusually thick bezels seen on the retail versions of the RG34XX SP. Sadly, it appears that the joystick-less RG34XX SP will probably never be released, even with the RG35XX SP’s popularity.

    Source:
    Link


  • Anbernic Reveals Key Specs for New Miyoo Flip Rival RG34XX SP

    Anbernic Reveals Key Specs for New Miyoo Flip Rival RG34XX SP

    Key Takeaways

    1. Anbernic’s RG34XX SP features a 3.4-inch display with a resolution of 720 x 480 pixels.
    2. The device is powered by the Allwinner H700 quad-core processor and has 2 GB of LPDDR4 RAM for improved performance.
    3. It includes Bluetooth 4.2 and 5 GHz Wi-Fi connectivity options.
    4. The RG34XX SP has a 3,300 mAh battery that can last up to 6 hours on a single charge.
    5. Anbernic has emphasized the sturdiness of the RG34XX SP’s hinge design, contrasting it with issues faced by the Miyoo Flip.


    Anbernic has released more information about the RG34XX SP, just three days after presenting its new alternative to the Miyoo Flip (currently priced at $74.99 on Amazon). At first, Anbernic concentrated on the design of its latest portable device, while also sharing some details such as a 3.4-inch display with a resolution of 720 x 480 pixels.

    New Specifications Confirmed

    The company has now revealed that this 3:2 display will be powered by the Allwinner H700, a quad-core processor that Anbernic has frequently used over the past year. This suggests that the RG34XX SP offers performance similar to the current RG35XX SP. However, the increase from 1 GB to 2 GB of LPDDR4 RAM is likely to yield a noticeable performance boost in specific scenarios.

    Connectivity and Battery Life

    Other features like Bluetooth 4.2 and 5 GHz Wi-Fi remain available, along with a 3,300 mAh battery that Anbernic says can last up to 6 hours on a single charge. It appears that Anbernic has subtly criticized Miyoo, whose clamshell device still faces hinge problems despite a version 2 update. While not overtly stated, Anbernic has taken the unusual approach of highlighting the RG34XX SP’s hinge design and its sturdiness. For complete specifications, take a look at the video linked below.

    Source:
    Link

  • Anbernic RG34XX SP: Official Game Boy Advance SP Lookalike

    Anbernic RG34XX SP: Official Game Boy Advance SP Lookalike

    Key Takeaways

    1. Anbernic is set to release the RG34XX SP, following hints about multiple gaming handhelds planned for this year.
    2. The RG34XX SP features emulation capabilities for PS1, PSP, and N64, likely using the Allwinner H700 chipset.
    3. It includes a 3.4-inch display with a resolution of 720 x 480 pixels and a 3:2 aspect ratio.
    4. The new model will have dual joysticks, an upgrade from previous versions, likely influenced by competition.
    5. Anbernic has not yet announced a specific release date for the RG34XX SP.


    It seems the RG34XX SP is nearly here, as Anbernic hinted last month about having another ten gaming handhelds planned for this year. To recap, there were whispers in late January regarding Anbernic’s development of a new gaming handheld resembling the original Game Boy Advance SP (GBA SP). Just recently, some leaked specs appeared online shortly after Anbernic launched the RG557.

    Official Announcement

    Now, the company has officially announced the RG34XX SP in a video shared below. As usual, they began by showcasing the design of the handheld instead of giving a complete list of specifications. However, we can deduce a few important details from the video linked below.

    Technical Insights

    For instance, mentions of PS1, PSP, and N64 emulation capabilities imply that Anbernic has integrated the same Allwinner H700 chipset found in the RG35XX SP (currently priced at $78.99 on Amazon). Thus, it would not be surprising if the RG34XX SP also comes with 1 GB of RAM.

    Display Features

    The RG34XX SP, as anticipated, sports the 3.4-inch screen from the current RG34XX. As a result, this model will deliver a native resolution of 720 x 480 pixels with a 3:2 aspect ratio, allowing for a 3x native integer scaling when playing GBA games. Another significant update compared to the RG35XX SP is the addition of dual joysticks, likely in response to the Miyoo Flip’s presence. Anbernic hasn’t yet disclosed a release date, but we doubt they will keep that detail about their latest gaming handheld under wraps for too long.

    Source:
    Link


     

  • Anbernic RG34XX SP Specs Leaked: Game Boy Advance SP Lookalike

    Anbernic RG34XX SP Specs Leaked: Game Boy Advance SP Lookalike

    Key Takeaways

    1. Anbernic has launched the RG557, its first gaming handheld for 2025, with plans for up to 10 new models by the end of the year.
    2. Rumors suggest the RG34XX SP will feature a new chipset, possibly the Allwinner H700, aligning its performance with the RG35XX SP.
    3. The RG34XX SP will have design similarities to the Game Boy Advance SP and will be smaller than the RG35XX SP.
    4. The RG34XX SP is expected to have a 3.4-inch display with a resolution of 720 x 480 pixels and will emulate GBA games at 2x integer scaling.
    5. Initial teasers for the RG34XX SP are expected to be released in the coming weeks, with the launch projected for next month.


    Anbernic has recently launched the RG557 globally, marking its first gaming handheld for 2025. After a four-month pause between the RG34XX and RG557, the company does not plan to repeat this timeline in the future. In fact, Anbernic has hinted that the RG557 could be just the beginning, with up to 10 new models expected by the end of this year.

    New Rumors About RG34XX SP

    Recently, rumors have surfaced regarding the anticipated RG34XX SP. To recap, earlier reports from January indicated that this model would be more than just an RG34XX housed in a Game Boy Advance SP (GBA SP) style shell. At that time, there were claims that Anbernic was exploring the use of the RG34XX SP to highlight a new chipset. This chipset was rumored to sit between the Rockchip RK3566 and Unisoc Tiger T618 in terms of performance, with the MediaTek Helio P65 being considered as a potential option.

    Updates on Performance Expectations

    However, the latest information suggests a change in direction. Specifically, the Allwinner H700 is likely to be featured in the RG34XX SP, a chipset Anbernic has utilized in numerous budget retro gaming handhelds over the past year. Consequently, the performance of the RG34XX SP will align more closely with the RG35XX SP (currently priced at $79.99 on Amazon), even as Powkiddy is rumored to be rejoining the clamshell market with the V90 V2.

    Size and Display Differences

    From what we understand, the key differences between the RG34XX SP and the RG35XX SP will be the size and display of the former. It appears that the RG34XX SP will be more akin to the original GBA SP in dimensions compared to the RG35XX SP. Furthermore, the RG34XX SP is expected to emulate GBA games at precise 2x integer scaling, thanks to its 3.4-inch display running at a resolution of 720 x 480 pixels. At present, the RG34XX SP is projected to launch next month, with initial teasers anticipated to drop in the next couple of weeks.

    Source:
    Link


  • Anbernic RG34XX SP: New 3:2 Clamshell Gaming Handheld Rumors

    Anbernic RG34XX SP: New 3:2 Clamshell Gaming Handheld Rumors

    Anbernic has been quite busy last year, launching a slew of gaming handhelds, with the RG34XX (curr. $84.99 on Amazon) being the last one just before the holiday season. Even though Anbernic does not share any sales numbers for its products, it seems like the RG35XX SP has taken the lead in popularity, especially seeing how it received an update just four months after it was first launched.

    New Competitor in the Market

    Recently, Miyoo launched the Flip, which serves as an alternative to the RG35XX SP. This new device is smaller and features two joysticks, making it a notable addition. It’s important to mention that the Miyoo Flip has gotten mixed feedback, and as time goes on, opinions seem to be diverging even more. However, there are whispers that Anbernic is already working on the RG34XX SP to counter this new competition.

    Expected Features of RG34XX SP

    It looks like Anbernic plans to make the RG34XX SP by using the same display from the RG34XX and putting it into a shell inspired by the RG35XX SP and the Game Boy Advance SP (GBA SP). The RG34XX’s 3.4-inch display with a resolution of 720 x 480 pixels would provide perfect 2x integer scaling for GBA games, which is a great feature for gamers.

    Rumor has it that this new 3:2 display will be paired with a different chipset—not the Allwinner H700 that is currently used in the RG34XX and other recent RG35XX models. From the image shared, it seems that Anbernic is aiming for performance that sits between the Rockchip RK3566 and the Unisoc Tiger T618. While many details are still under wraps, some speculate that this might be the MediaTek Helio P65, which features two ARM Cortex-A75 cores, six Cortex-A55 cores, and a Mali-G52 MP2 GPU, all built on a 12 nm process.

    Source:
    Link