Tag: Anbernic

April 17, 2025
Anbernic Announces 2025 Handheld Gaming Release Plans After RG34XX SP Rumors
Key Takeaways
1. Anbernic has had a quiet start to 2024, with no new product launches so far, unlike the previous year’s monthly releases.
2. The only release this year is the Glacier color update for the RG34XX, priced at $89.99.
3. A successor to the RG556, named RG557, is expected to be unveiled soon.
4. Anbernic plans to launch “at least seven or eight” new devices this year, possibly up to ten, excluding the RG557.
5. The RG557 is likely to be released later this month, featuring the MediaTek Dimensity 8300, with additional models expected to follow.
Anbernic has had a rather quiet beginning this year. To put it in perspective, last year, the company was on a roll, launching a new gaming handheld each month throughout 2024. In stark contrast, there have been no new product launches this year so far.
Refresh of the RG34XX
The only notable release from Anbernic in 2024 is the Glacier color update for the RG34XX, which arrived less than a month after the original device’s debut (currently priced at $89.99 on Amazon). On another note, it’s becoming clear that a successor to the RG556, called the RG557, is close to being unveiled.
Upcoming Devices on the Horizon
Although one might anticipate that Anbernic has slowed its pace since they waited till April to hint at new hardware, it seems that a flood of new gaming handhelds from Anbernic is imminent.
Reportedly, Anbernic is looking to launch “at least seven or eight” new devices this year, not counting the RG557. This figure might even be a low estimate, as the company is suggesting that “around ten” could be a more accurate total.
Launch Expectations
As of now, it seems very likely that the RG557 will be released later this month. This will be Anbernic’s first gaming handheld powered by the MediaTek Dimensity 8300, and it is expected to be quickly followed by two additional models. Recent rumors hint that one of these could be the RG34XX SP, which is said to be more than just an RG34XX dressed up like an RG35XX SP. Additionally, Anbernic has yet to launch its translucent pink or fuschia versions that were leaked back in February. It’s still unclear if these will count as new releases for the company at this time.
Source:
Link
Tags: Anbernic, Gaming Handhelds, RG557
April 16, 2025
Anbernic RG557 Specs Revealed for Nintendo Wii U Emulation Gaming
Key Takeaways
1. Anbernic has confirmed the existence of the RG557 gaming handheld, following a gradual information release strategy.
2. The RG557 will feature a MediaTek Dimensity 8300 chip and 12 GB of LPDDR5X RAM, along with a 5.48-inch 1080p AMOLED display.
3. An active cooling system will be included to minimize thermal throttling, enhancing overall performance.
4. The device will offer 256 GB of UFS 4.0 flash storage, Bluetooth 5.3, Wi-Fi 6E connectivity, and a 5,500 mAh battery with 27 W charging support.
5. Speculation suggests the RG557 may launch at around $205, representing a $30 increase over the RG556, but exact pricing and release date are still unconfirmed.
Anbernic has moved closer to launching the RG557, having confirmed its existence just over a week ago. True to their style, Anbernic has chosen to share information about this new gaming handheld gradually instead of all at once. As a result, there have been several leaks regarding the RG557 and how it will stand out from the current RG556 (currently priced at $229.99 on Amazon).
Specifications Revealed
All previous leaks have proven to be correct. The video below shows that Anbernic has outfitted the RG557 with a MediaTek Dimensity 8300 chip and 12 GB of LPDDR5X RAM. This setup will drive a 5.48-inch 1080p AMOLED display. While it’s not the Snapdragon G2 Gen 2 that people first thought, the Dimensity 8300 is set to give the RG557 a significant performance boost compared to its predecessor.
Enhanced Features
To further enhance its capabilities, an active cooling system is expected to reduce thermal throttling. The device will also feature 256 GB of UFS 4.0 flash storage, ensuring smooth system performance. Additionally, the RG557 will come equipped with Bluetooth 5.3 and Wi-Fi 6E connectivity, a robust 5,500 mAh battery that supports 27 W charging, and capacitive joysticks.
Anbernic has yet to announce the exact release date or pricing for the RG557. Recent speculation suggests that it may launch at around $205, which would be a $30 and 17% increase over the RG556. It’s likely that Anbernic will provide the final details regarding the RG557 in the days ahead.
Source:
Link
Tags: Anbernic, gaming handheld, RG557
April 14, 2025
Anbernic RG557 Pricing Revealed with New Specs and Gameplay Footage
Key Takeaways
1. Anbernic has not announced a release date for the RG557, which will replace the RG556 priced at $229.99.
2. The RG557 will feature MediaTek’s Dimensity 8300 chipset, 12 GB of LPDDR5X RAM, and 256 Gb of expandable storage.
3. The handheld is expected to have a 5,500 mAh battery, providing up to 8 hours of gaming, and support 27 W wired charging.
4. Design specifications include dimensions of 223 x 89 x 15 mm and a weight of approximately 347 g.
5. The estimated price for the RG557 is around $205, which is a $30 increase from the RG556.
Anbernic has yet to announce the release date for its first gaming handheld this year. At the moment, the company has only verified that it will be launching the RG557, which is meant to replace the RG556 (currently priced at $229.99 on Amazon) featuring a 1080p, 16:9 aspect ratio with a 5.48-inch AMOLED screen.
New Chipset Information
However, Retro Handhelds reported last week that Anbernic has opted for MediaTek’s Dimensity 8300 for the RG557, instead of the previously speculated Qualcomm Snapdragon G2 Gen 2. According to the website, the upcoming device is expected to come equipped with 12 GB of LPDDR5X RAM and 256 Gb of storage that can be expanded.
Battery Life and Features
In addition, the RG557 is rumored to have a 5,500 mAh battery that could provide up to 8 hours of gaming on a single charge. Furthermore, this handheld is anticipated to support 27 W wired charging, feature Hall effect triggers, ‘anti-magnetic capacitive’ joysticks, and a six-axis gyroscope for an enhanced gaming experience.
Size and Pricing Estimates
All of these components are likely to be housed in a design measuring 223 x 89 x 15 mm and weighing around 347 g. As of now, Retro Handhelds suggests that Anbernic might price the RG557 at about $205, representing a $30 increase and 17% more than the RG556. Meanwhile, Anbernic has shared more gameplay footage of the RG557 in three different colors, which we have included below.
Source:
Link
Tags: Anbernic, MediaTek Dimensity 8300, RG557
April 9, 2025
Anbernic RG557 Chipset for Nintendo Wii U Emulation Unveiled Early
Key Takeaways
1. The Anbernic RG557 features a 5.48-inch AMOLED screen with a resolution of 1,920 x 1,080 pixels and a 16:9 aspect ratio.
2. The device is capable of emulating PS2 and PSP games at 4x and 8x original resolutions, respectively.
3. There is speculation about the chipset, with hints towards either the Snapdragon G2 Gen 2 or the MediaTek Dimensity 8300.
4. The Dimensity 8300 may provide a significant performance boost over the RG556 and a 30% advantage over the Retroid Pocket 5 in CPU tasks.
5. The RG557 will be the first handheld gaming device to feature capacitive joysticks for improved accuracy.
Anbernic has recently introduced the RG557, and it has been about twenty four hours since this announcement. True to its style, Anbernic has shown off the device’s design, gaming capabilities, and some specifications. A notable feature is its 5.48-inch AMOLED screen, which has a resolution of 1,920 x 1,080 pixels and follows a 16:9 aspect ratio.
Gaming Performance Insights
Furthermore, the company hinted that the RG557 is capable of emulating specific PS2 and PSP titles at 4x and 8x their original resolutions, respectively. However, the company has not disclosed which chipset powers this new gaming device. Leaked information hints that Anbernic might be using the Snapdragon G2 Gen 2, which Qualcomm unveiled last month.
Speculation on Chipsets
Retro Handhelds, however, disagrees with this assumption. According to their source, described as an ‘Anbernic rep’, the RG557 will be equipped with the MediaTek Dimensity 8300, which we reviewed last year, along with its ‘Ultra’ version found in the Poco X6 Pro and Xiaomi 14T (currently priced at $509 on Amazon). Our benchmarks showed that the Dimensity 8300 would significantly enhance the RG557’s performance compared to the RG556, which is powered by the older and less efficient Unisoc T820.
Competitive Edge and Features
As noted by Retro Handhelds, the Dimensity 8300 would provide the RG557 an edge over the Retroid Pocket 5 as well. Specifically, Anbernic’s upcoming device could outshine the Pocket 5 by around 30% in CPU-intensive tasks. However, the difference in their GPUs might be almost negligible. Interestingly, the RG557 is set to be the first gaming handheld to use capacitive joysticks, which should improve accuracy. It is likely that Anbernic will share more information about the RG557 in the near future.
Source:
Link

Tags: Anbernic, MediaTek Dimensity 8300, RG557
March 14, 2025
Anbernic RG557 Rumors and New Gaming Products Spotted
Key Takeaways
1. Anbernic has been quiet after a busy 2024, releasing a new handheld each month and recently adding a fifth color option to the RG34XX.
2. There are hints of a successor to the RG556, with a prototype reportedly shown at CES 2025.
3. The new device may be named ‘RG557’ and is expected to feature a 5.5-inch 1080p display with a 60 Hz refresh rate.
4. Anbernic might upgrade the processor from the Unisoc Tiger T820 to the Snapdragon G2 Gen 1, paired with 8 GB of LPDDR4 RAM.
5. The RG557 could support 33 W fast charging and will maintain a similar size to the RG556, but other specifications remain unknown.
Anbernic has been a bit quiet recently after a very busy 2024. Just to summarize, the company released a new gaming handheld every month last year, ending with the RG34XX launch in December (curr. $84.99 on Amazon). Although there have been whispers about an RG34XX SP, Anbernic has only added a fifth color option to the RG34XX.
New Developments on the Horizon
There’s growing evidence that Anbernic is working on a successor to the RG556, which came out in February 2024. A company linked to Anbernic reportedly showed off an early prototype at CES 2025 in January, and we’ve included proof of this from Silicon Den below.
Naming and Specifications
It’s not clear yet what name Anbernic will give to this new device. Going by their usual naming pattern, it seems likely that it will be called ‘RG557’ because of its 5.5-inch display. This screen is said to operate at 1080p with a 60 Hz refresh rate and a 16:9 aspect ratio, similar to the RG556. We’re still waiting to find out if OLED technology will be used again in the RG557.
Possible Upgrades
Anbernic might replace the Unisoc Tiger T820 in the RG556 with the Snapdragon G2 Gen 1, which Qualcomm introduced in 2023 along with the Snapdragon G1 Gen 1 and Snapdragon G3x Gen 2. If the image shown is correct, then the Snapdragon G2 Gen 1 will be paired with 8 GB of LPDDR4 RAM and support for 33 W fast charging, all within a 255 x 114 x 32 mm body. Sadly, other specifications are still not known at this time.
Source:
Link
Tags: Anbernic, RG557, Snapdragon G2 Gen 1
March 4, 2025
Anbernic RG40XX V Clone Features Odd Joystick Placement
Key Takeaways
1. Anbernic has reduced the frequency of new gaming handheld releases compared to last year, launching fewer models with similar hardware.
2. The latest handheld device from Anbernic is the RG34XX, priced at $84.99, and is set to receive a second update soon.
3. Speculation surrounds Game Console’s upcoming device, hinting it may be inspired by Anbernic’s RG40XX V and referred to as the ‘soccer ball machine.’
4. The design of Game Console’s new handheld includes a unique button arrangement similar to the RG40XX V, with a centrally positioned joystick.
5. Details about the chipset and display specifications of Game Console’s future device are currently unknown.
Anbernic has slowed down its aggressive release schedule for new gaming handhelds compared to last year. To sum up, the company was able to launch new models each month, but many of these devices shared the same core hardware.
Latest Handheld Release
Currently, the newest Anbernic device is the RG34XX (curr. $84.99 on Amazon), which is expected to receive a second update soon, even though it’s less than three months old. While Anbernic hasn’t made any new announcements, it appears that Game Console is planning to modify one of its recent handhelds.
Speculations About Game Console
Although not directly naming the company, Nittrx has referred to the one behind the ‘soccer ball machine’. This seems to hint at the R36 Max, which launched at the end of January. In this instance, Game Console appears to have taken inspiration from the RG40XX V’s unique design.
Unnamed Future Device
The name of Game Console’s upcoming gaming handheld remains a mystery for now. However, the arrangement of its ABXY, Start/Select, and d-pad buttons aligns with the RG40XX V, alongside its front-facing speaker grille. Interestingly, Game Console has repositioned the single joystick to the center, making it equidistant from the d-pad and ABXY buttons. Currently, there are no further details available regarding the chipset and display specifications of this new device.
Source:
Link

Tags: Anbernic, RG34XX, RG40XX V
January 31, 2025
Retroid Pocket Flip 2 Rumors Emerge After Miyoo Flip Launch
The handheld gaming market is full of choices today. Anbernic leads the way with a steady stream of new handheld gaming devices, while Powkiddy and a few others also manage to roll out several new models each year.
Retroid’s Recent Releases
On the other hand, Retroid has cut back on the number of releases it offers each year, launching only a few new devices. In 2024, for instance, the company introduced the Pocket 5 and Pocket Mini, which serve as updates to the Pocket 4 and Pocket 4 Pro that came out nearly a year before.
Speculations about New Devices
As per Joey’s Retro Handhelds, a new version of the Retroid Pocket Flip is in the works, which the YouTuber has dubbed the Pocket Flip 2. Currently, there is no information available on the specifications of this anticipated device, nor on how Retroid plans to differentiate it from the earlier model.
Performance Expectations
However, the original Pocket Flip is powered by a Unisoc Tiger T618 chipset, hinting that its successor will likely outperform rivals like the Miyoo Flip or the Anbernic RG35XX SP, which is currently priced at $76.99 on Amazon. The new RG34XX SP is also expected to offer performance that sits somewhere between the Rockchip RK3566 and the Unisoc Tiger T618.
Source:
Link
Tags: Anbernic, Powkiddy, Retroid Pocket Flip 2
January 31, 2025
Anbernic RG34XX SP: New 3:2 Clamshell Gaming Handheld Rumors
Anbernic has been quite busy last year, launching a slew of gaming handhelds, with the RG34XX (curr. $84.99 on Amazon) being the last one just before the holiday season. Even though Anbernic does not share any sales numbers for its products, it seems like the RG35XX SP has taken the lead in popularity, especially seeing how it received an update just four months after it was first launched.
New Competitor in the Market
Recently, Miyoo launched the Flip, which serves as an alternative to the RG35XX SP. This new device is smaller and features two joysticks, making it a notable addition. It’s important to mention that the Miyoo Flip has gotten mixed feedback, and as time goes on, opinions seem to be diverging even more. However, there are whispers that Anbernic is already working on the RG34XX SP to counter this new competition.
Expected Features of RG34XX SP
It looks like Anbernic plans to make the RG34XX SP by using the same display from the RG34XX and putting it into a shell inspired by the RG35XX SP and the Game Boy Advance SP (GBA SP). The RG34XX’s 3.4-inch display with a resolution of 720 x 480 pixels would provide perfect 2x integer scaling for GBA games, which is a great feature for gamers.
Rumor has it that this new 3:2 display will be paired with a different chipset—not the Allwinner H700 that is currently used in the RG34XX and other recent RG35XX models. From the image shared, it seems that Anbernic is aiming for performance that sits between the Rockchip RK3566 and the Unisoc Tiger T618. While many details are still under wraps, some speculate that this might be the MediaTek Helio P65, which features two ARM Cortex-A75 cores, six Cortex-A55 cores, and a Mali-G52 MP2 GPU, all built on a 12 nm process.
Source:
Link
Tags: Anbernic, Miyoo Flip, RG34XX SP
January 6, 2025
Anbernic RG34XX: New Retro Handheld Inspired by Game Boy Advance
Anbernic has been quite active lately, launching at least one new device each month throughout last year. In fact, just five days into the new year, the company has already introduced a fresh product. They have updated the RG34XX, which comes less than a month after it was first released. To give you an idea, the RG34XX features some impressive hardware highlights:
A Cosmetic Upgrade
Essentially, the new RG34XX is simply a visual update, similar to the RG35XX SP that came before it (currently priced at $79.99 on Amazon). As expected, Anbernic is sticking closely to the heritage of the Game Boy Advance (GBA). This time around, they’ve launched a ‘Glacier’ version of the RG34XX, taking inspiration from one of the GBA variants that Nintendo also named.
Color Comparison
Some might say that Anbernic’s Glacier finish is a lot whiter compared to Nintendo’s version, which has a slight blue hue. Right now, the updated RG34XX can be bought directly from AliExpress and Anbernic for $69.99, which includes a 32 GB MicroSD card. For those looking for more storage, the handheld is also available with 64 GB, 128 GB, and 256 GB MicroSD cards, priced at $77.99, $84.99, and $99.99, respectively.
Source: Link
Tags: Anbernic, Game Boy Advance, RG34XX
December 16, 2024
Anbernic RG34XX: Modern Game Boy Advance Gets Positive Reviews
Anbernic has begun the global sale of the RG34XX, which features similar hardware to the RG35XX SP (currently priced at $89.99 on Amazon). This marks Anbernic’s eleventh handheld gaming device released this year, not counting the K101 Plus and RG35XX SP updates. The RG34XX comes equipped with the following specifications:
Key Specifications
The RG34XX boasts all the main hardware found in Anbernic’s RG35XX series, except for a slightly smaller 0.1-inch screen. A major attraction of the RG34XX is its nostalgic appeal, heavily influenced by the design of the Game Boy Advance (GBA). However, as pointed out by Retro Game Corps, the GBA’s shape may not be comfortable for users with bigger hands. Despite this, both Retro Game Corps and Retro Handhelds regard the RG34XX as the ‘ideal Game Boy Advance’ in many ways.
Performance Insights
It’s important to note that the Allwinner H700 chip is powerful enough to emulate various systems, including Dreamcast, PlayStation 1 (PS1), and PSP, among others. Right now, the RG34XX can be purchased directly from Anbernic for $63.99, and it comes with a 32 GB MicroSD card, available in transparent green, transparent red, black, and indigo. Additionally, customers can opt for configurations with 64 GB, 128 GB, and 256 GB MicroSD cards, priced at $71.99, $78.99, and $93.99 respectively.
Conclusion
Anbernic’s latest handheld offering, the RG34XX, taps into the heart of retro gaming while delivering solid performance. With its various color options and customizable storage, it aims to attract both nostalgic gamers and new users alike.
Source: Link
Tags: Anbernic, Game Boy Advance, RG34XX