Key Takeaways
1. Minimal skill required for assembly and low cost for the Bumble Berry Pi project.
2. Uses easily sourced components from Amazon, with no soldering needed except for threaded inserts.
3. Powered by a built-in 37 Watt hour battery bank, providing all-day operation.
4. Utilizes a Raspberry Pi 3b+, with an option to upgrade to Raspberry Pi 5 for better performance.
5. Complete project information, including instructions and materials, is available for free on GitHub, with a total cost under $100.
Building a DIY laptop or portable device usually requires a fair amount of engineering skill. Yet, Samcervantes on GitHub wants to change that perception. Frustrated with the long wait time of three months for a Clockwork Pi uConsole, this modder took matters into their own hands and created their own version.
Easy and Affordable Assembly
What sets this creation apart is the minimal skill needed for assembly and the low cost. Besides the parts that are 3D printed, the Bumble Berry Pi can be assembled using components that are easily found on Amazon. It doesn’t require any soldering, except for using an iron to press in the threaded inserts.
Powering the Device
The entire setup runs on a 37 Watt hour battery bank that is built into the case, providing enough power to keep the device running all day without any interruptions.
This build utilizes a Raspberry Pi 3b+, which may not be the most powerful option by today’s standards. However, if you’re looking for more performance, you can easily replace it with a Raspberry Pi 5 (which you can find on Amazon). Just keep in mind that upgrading may lead to shorter battery life.
Cost-Effective Weekend Project
While the OmniOne has gained attention on Kickstarter for $359, the Bumble Berry Pi offers a fun project that can be assembled for under $100, especially if you already own a Pi and a 3D printer.
All the information about this project, including assembly instructions, the list of materials, and STL files, can be accessed for free on GitHub.
Source:
Link